Hi Guys, Sorry I need to ask help for my 4400 controller. I'm hoping if you could help me or you already experience this before.
I just got a 4400 controller it's an old controller and I'm planning to use this for my CCIE lab. When I turned the power on it first read the memory and after testing the memory, from the output I see this "Memory Test Pass" it just suddenly STOP. Reboot several times but still the same output. So I checked the sequence on how this controller should boot up and I it tells me that after the memory was test the next to be tested is the flash card. So I'm suspecting the problem is the corrupted flash card. Currently I don't have another 4400 controller for me to format the corrupted flash card. I'm just wondering if you have another idea how I can format this corrupted flash card? Thanks in advance. Cheers, Manolo S. Encelan Presales Engineer BT Al Saudia|P.O.Box 16828|Riyadh 11474|Saudi Arabia| Mob :+966555048119 | Fax: +966 1 476 2808 Email : [email protected] Check out www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
