Make sure you define "switchport trunk native vlan x" to define the vlan upon
which untagged packets should reside. By default, this will be vlan 1, and if
you are using a different vlan id in your access vlan command, then that would
be why the mac address isn't showing up in the expected vlan. The access point
in default or unconfigured mode has no idea about any vlan tags, and thus is
always sending untagged packets. Only when you configure the access point in
HREAP mode will it start to even attempt to use 802.1q tags, if appropriately
configured.
Regards,
Ron
--
Ron Marosko, Jr.
. . . . . . . . . . . . . . . . . . . . . . . . . .
CCIE No. 4526 (R/S), CWNA, ACMA, NN5DX
Consulting Network Architect
Global Technology Resources,Inc.
1108 West Dickinson Blvd, Suite A
Fort Stockton, TX 79735 USA
o: +1 432 336 5600 x110
c: +1 720 233 3147
e: [email protected]
pgp pubkey: 0x58AB8B5C
"To know me is to fly with me."
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Kristján Ólafur
Eðvarðsson
Sent: Monday, June 25, 2012 8:16 AM
To: [email protected]
Subject: [OSL | CCIE_Wireless] 1242 capwap with poe module and switchport in
vlan trunk mode
I have been troubleshooting a capwap ap connectivity.
The ap is 1242 with poe injector (if it is relevant) and works fine on a access
vlan.
Now puting the port to trunk mode (native vlan correct and the same as it was
on access) However when I change to trunk mode the AP Mac address disapears
from the interface mac table and I cant communicate get an DHCP or whatever.
Has anyone seen something like that ?
I tried clear capwap private config,
reload the switch,
shut un shut ports.
Still the MAC address just isn´t learned and this is the core of the problem.
Its a 3560 switch.
As soon as I change to access mode the mac is learned instantly.
I have never seen this issue before, wonder if someone knows anything.
regards. Kristjan
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
This message contains confidential information and is intended only for the
individual named. Please notify the sender immediately by e-mail if you have
received this e-mail by mistake and delete this e-mail from your system. Any
opinions presented in this email are solely those of the author and do not
necessarily represent those of the company. E-mail transmission cannot be
guaranteed to be secure or error-free; the sender therefore does not accept
liability for any errors or omissions in the contents of this message, which
arise as a result of e-mail transmission.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
