WDS uses layer 2 multicast (not layer 3) which makes it unroutable. 



Sent from Samsung mobileShahin Mammadov <[email protected]> wrote:Dear Oliver,
I am not mentioning IPv4 multicast addresses, which you are right are mapped to 
ethernet MAC starting with 01-00-5E.
01:40:96:ff:ff:c0 is well-known ETHERNET multicast address for iapp protocol.

Regarding inter-subnet WLCCP i suggest to read patent related to creation of 
WLCCP protocol:
http://www.google.com/patents/US7706345, which clearly states that there is 
specification on how to pass inter-subnet WLCCP traffic

Regards,
Shahin


Sent from my iPhone

On Nov 12, 2012, at 8:53 PM, Oliver Jancevski <[email protected]> wrote:

> 
> I dont think you can route the MAC address bellow. All standard IPv4 
> multicast addresses translate to 1st 3 bytes of the MAC to be 01-00-5E.
>  
> This is confirmed in the WDS FAQ:
> Q. How do the WDS and the infrastructure APs in the WLAN communicate with 
> each other?
> 
> A. The WDS and the infrastructure APs communicate over a multicast protocol 
> called the Wireless LAN Context Control Protocol (WLCCP). These multicast 
> messages cannot be routed. Therefore, a WDS and the associated infrastructure 
> APs must be in the same IP subnetwork and on the same LAN segment. Between 
> the WDS and the Wireless LAN Solution Engine (WLSE), WLCCP uses Transmission 
> Control Protocol (TCP) and User Datagram Protocol (UDP) on port 2887. When 
> the WDS and WLSE are on different subnetworks, packet translation with a 
> protocol like Network Address Translation (NAT) cannot occur.
> 
> 
> 
> --- On Sun, 11/11/12, Shahin Mammadov <[email protected]> wrote:
> 
> 
> From: Shahin Mammadov <[email protected]>
> Subject: Re: [OSL | CCIE_Wireless] WDS
> To: "------" <[email protected]>
> Cc: "[email protected]" <[email protected]>
> Received: Sunday, November 11, 2012, 4:22 PM
> 
> Hi,
> WDS communicates over the network using the Wireless LAN Context Control 
> Protocol (WLCCP). This protocol uses the multicast destination address 
> 01:40:96:ff:ff:c0 for advertisement and discovery of the WDS master. Once the 
> master is discovered by WDS clients, then un
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to