if the client does not get an IP it will switch the VLAN for the client until
it finds one that works. That means no DHCP or other network issues might be
going on (VLAN in trunk/incorrect VLAN #, etc). You will need to confirm the
rest of your config.
________________________________
From: Jaffar Nassiry <[email protected]>
To: Rupojit Dutta (rudutta) <[email protected]>;
"[email protected]" <[email protected]>
Sent: Monday, June 3, 2013 3:20 PM
Subject: Re: [OSL | CCIE_Wireless] wlc interface group not working in round
robin pattern
I’d create separate AP groups and matching dynamic interfaces. When assigning
a WLAN to the AP group select the appropriate interface group.
Thanks!
Jaffar Nassiry
From: [email protected]
[mailto:[email protected]] On Behalf Of Rupojit Dutta
(rudutta)
Sent: Monday, June 03, 2013 1:46 PM
To: [email protected]
Subject: [OSL | CCIE_Wireless] wlc interface group not working in round robin
pattern
Hi All
I have two interfaces configured in in WLC and was tryring to assign IP address
from different VLANS to clients connecting to same SSID, after configuration I
have tried connecting three clients but all are assigned ip address from same
VLAN, round-robin VLAN assignment is not working .
can yyou please suggest how to make this work.
regards,
Rupojit
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
