Hi Rupojit, when an interface group is assigned to a WLAN, the controller used to assign the wireless client to the interfaces (Vlan) by round-robin. This was changed to use a hash of the MAC address, maybe in a 7.0 version already. The advantage is, that every time a client associate to the SSID, the client will get an IP address from the same Vlan or even the same IP address. Kind regardsJens Neelsen
--- On Mon, 6/3/13, Jaffar Nassiry <[email protected]> wrote: From: Jaffar Nassiry <[email protected]> Subject: Re: [OSL | CCIE_Wireless] wlc interface group not working in round robin pattern To: "Rupojit Dutta (rudutta)" <[email protected]>, "[email protected]" <[email protected]> Date: Monday, June 3, 2013, 9:20 PM I’d create separate AP groups and matching dynamic interfaces. When assigning a WLAN to the AP group select the appropriate interface group. Thanks!Jaffar Nassiry From: [email protected] [mailto:[email protected]] On Behalf Of Rupojit Dutta (rudutta) Sent: Monday, June 03, 2013 1:46 PM To: [email protected] Subject: [OSL | CCIE_Wireless] wlc interface group not working in round robin pattern Hi AllI have two interfaces configured in in WLC and was tryring to assign IP address from different VLANS to clients connecting to same SSID, after configuration I have tried connecting three clients but all are assigned ip address from same VLAN, round-robin VLAN assignment is not working .can yyou please suggest how to make this work. regards,Rupojit -----Inline Attachment Follows----- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
