Yes I agree, it should be more like "Cisco compatible" clients in that case.
And it should specify v5 clients also, because not all CCX clients are able to
use MFP!When using MFP to allow only CCX clients, make sure to enable "client
MFP". Infrastructure MFP won't work.
—
Sent from Mailbox for iPhone
On Mon, Jan 6, 2014 at 8:41 AM, Andreas di Zazzo
<[email protected]> wrote:
> I'd imagine what they want is to set MFP to Required on the WLAN which
> is a CCX feature.
> Not exactly "Cisco clients". Silly question.
>
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Jay
> Killion (jakillio)
> Sent: den 6 januari 2014 00:09
> To: [email protected]
> Subject: [OSL | CCIE_Wireless] WB 1 - Lab 3.12
>
> Question on lab 3.2 -
>
> The task is to configure autonomous AP 1 to connect as a WGB to
> autonomous AP 2. One of the bullets is as follows..
> * Ensure that only Cisco clients can connect to this SSID
> I've read through the solution several times, but can't see where this
> requirement is met or explained. I would need to ask a proctor if this
> were the real lab since I think the requirement is ambiguous. Which
> Cisco clients? Cisco AP's? Cisco phones? Any laptop but only with
> Cisco Anyconnect?
>
> I could see using an association list or MAC filter if the requirement
> was lock it down to only the specific AP, but I need to allow both only
> and any Cisco client. Any tips?
>
> Thanks -
>
> Jay Killion, CCIE #17873 R/S
_______________________________________________
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
