Not sure because I don't know the lab setup here, but I think you should use the Media Stream feature no?
2014/1/13 Jay Killion (jakillio) <[email protected]> > Hi all - > > I'm working on WB1, lab 5.8 – which involves some multicast > configuration on various WLC's. It's all pretty basic until I got this > bullet - "No other wireless clients connected to a WLC should be able to > receive multicast streams. Do not use any switch configuration for this." > > It's the last sentence that has me stumped. I know I can limit > multicast with IGMP filters, multicast boundary lists, or even just basic > ACL's – but only on the hop before the controller. Unless I've completely > misunderstood, once a wireless stream hits the controller it's going to be > sent to every AP (and each AP to any requesting client). If multicast > reaches the controller, even an ACL applied to the WLAN or interface won't > stop it. > > Have I misunderstood? Unfortunately, the solution guide doesn't explain > or show an answer that I see so I'm curious how you could solve the > requirement. > > Thanks - > > Jay Killion, CCIE #17873 R/S > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
