According to documentation (the WLC config guide has the best description of this feature), the violation method in the actual stream config only applies to the periodic RRC recheck. The one under the Media tab is for the initial RRC check.
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70cms.html Regards, Jeff Rensink : Sr Instructor : iPexpert <http://www.ipexpert.com/> CCIE # 24834 :: Wireless / R&S :: World-Class Cisco Certification Training Direct: +1.810.326.1444 :: Free Videos <http://www.youtube.com/ipexpertinc> :: Free Training / Product Offerings <http://www.facebook.com/ipexpert> :: CCIE Blog <http://blog.ipexpert.com/> :: Twitter <http://www.twitter.com/ipexpert> On Wed, Jan 22, 2014 at 7:38 AM, Jay Killion (jakillio) <[email protected]>wrote: > Hi all - > > Under each radio in the Media CAC section, you can select "Best Effort > QoS Admission" to simply mark down a VideoStream flow to BE if CAC fails. > However, when you configure the actual media stream you can select a > "Traffic Profile Violation" of either "drop" or "mark down". I'm assuming > the Media CAC section is the global configuration which can be overridden > on a per stream basis. Is that correct? IE – If I don't have "Best Effort > QoS Admission" checked in the Media CAC section, but do set the profile > violation to "mark down" for a specific stream, then it will still be sent > as BE upon CAC failure. > > Thanks - > > Jay Killion, CCIE #17873 R/S > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
