Ok, I was finally able to configure the General tab of the LSC part. I had to install SCEP as explained here: http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a99e23.shtml
I enabled AP Provisioning, Accept LSC in the AP Policies, and my APs have joined the controller using the LSC. Great, I'll next try the authorization part :) Andre 2014-02-05 Andre Aubet <[email protected]>: > Hi all, > > I'm currently reading about the LAP authentication and authorization when > joining a controller. > > I think I understand the differences between the three types of > certificate, and how the authorization process takes place. > > I will certainly practice the SSC and MIC authorization against an AAA > server, but I'm wondering about the LSC part. > > As it is needed to import an own-built certificate, using a PKI, is it > really requested to practice this? The fact is I just tried to configure it > (I installed the Cert Server on my Windows DC), but I have error boxes > popping just when I check the box "Enable LSC on Controller". > > I'm afraid the whole configuration could be complicated, and would take > too much time. > > However, if someone can give me a step-by-step configuration procedure, > I'm interested! I tried this one, but it gives me some errors: > > http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_lwap.html#wp1465430 > > Andre. >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
