thats ok craig.Thanks a lot

with kind regards
Maddy

On Tue, Apr 21, 2009 at 12:26 PM, Craig & Sammi Sutherland <
[email protected]> wrote:

>  Sorry Maddy,
>
>
>
> I don’t know Nant well enough to answer that question. You could try
> posting that on the Nant mailing list.
>
>
>
>
>
> Craig
>
>
>
> *From:* [email protected] [mailto:[email protected]] *On
> Behalf Of *madhu nambiar
> *Sent:* Tuesday, 21 April 2009 6:47 p.m.
>
> *To:* [email protected]
> *Subject:* [ccnet-user] Re: extract the contents of an IDE ??
>
>
>
> Hi craig,
>
>
>
>             Thanks for the great input u had given.Infact i had just
> checked now by running my nant scripts in the command line and i had found
> that the nant script does not wait for my IDE to complete the execution.The
> nant finishes off eventhough my IDE is going on with its execution.
>
>
>
> Another point which i want to mention is that my IDE is not getting invoked
> directly from nant.build,but instead nant.build is invoking a .vbs which
> invokes two .bat files which then invokes my IDE.So i just want to ask u
> that is this why my nant does not wait for my IDE to complete its execution
> since it is been called indirectly rather that directly.?
>
> Is there any modification required in my nant.build so that it waits for my
> IDE to complete its execution.
>
>
>
> with kind regards
>
> Maddy
>
> On Tue, Apr 21, 2009 at 2:00 AM, Craig & Sammi Sutherland <
> [email protected]> wrote:
>
> Hi Maddy,
>
>
>
> This is just showing the modification history – what we really need to see
> is the whole process for the two projects – from when you start the build on
> the first project to when the second project stops.
>
>
>
> Based on your e-mail about file merging I think your problem is with
> waiting on the IDE. Your Nant script starts the IDE doing a build, but does
> not wait for it to finish. Therefore the Nant script continues on past
> calling the IDE and terminates while the IDE is still running. Because Nant
> finishes, CC.NET <http://cc.net/> assumes everything has finished and it
> can move onto the next step.
>
>
>
> One way to test this would be to run your Nant script from the command line
> and see what happens. If the script is not waiting on the IDE you will see
> the IDE is still open when the Nant script has finished.
>
>
>
>
>
> Craig
>
>
>
> *From:* [email protected] [mailto:[email protected]] *On
> Behalf Of *madhu nambiar
> *Sent:* Tuesday, 21 April 2009 1:16 a.m.
>
>
> *To:* [email protected]
> *Subject:* [ccnet-user] Re: extract the contents of an IDE ??
>
>
>
> Hi craig,
>
>            I am extremely sorry for the late reply.I have pasted the log
> file( a small part) below
> 2009-04-07 12:22:32,692 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=part3.sm,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:26
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,739 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=part3.sm,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:26
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,739 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=posixApplication.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:28:17
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,739 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=posixApplication.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:28:17
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,754 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=posixApplication.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:12
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,754 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=posixApplication.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:12
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,770 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=vThreadsPosixInit.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:20
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,770 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=vThreadsPosixInit.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:20
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,770 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=vxMain.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:04
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,801 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=vxMain.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\part3,ModifiedTime=4/6/2009
> 5:31:04
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,801 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=Makefile,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:28:16
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,817 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=Makefile,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:28:16
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,817 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-ept.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:11
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,817 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-ept.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:11
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,832 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-ept.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:11
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,832 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-ept.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:11
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,848 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-stubs.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:25
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,848 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-stubs.c,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:25
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,848 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-stubs.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:25
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,864 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos-stubs.o,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:25
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,864 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos.lds,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:22
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
> 2009-04-07 12:22:32,879 [VSAT:DEBUG] Modification Modification:
> (Type=unknown,FileName=pos.lds,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:22
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was not accepted by the filter specification.
> 2009-04-07 12:22:32,879 [VSAT:DEBUG] Modification Modification: 2009-04-07
> 12:22:32,879 [VSAT:DEBUG] Modification Modification: (Type=unknown,FileName=
> pos.sm,FolderName=C:\ThreePartition\wrSbc750gx_ThreePartition\pos,ModifiedTime=4/6/2009
> 5:30:22
> PM,UserName=,ChangeNumber=0,Version=,Comment=,Url=,IssueUrl=,EmailAddress=)
> was excluded by filter PathFilter
> C:\ThreePartition\wrSbc750gx_ThreePartition\**.
>
>
>
> I am really not sure if this could help u out to spot the problem.Please
> get back to me for any doubts
>
>
>
> with kind regards
>
> Maddy
>
> On Mon, Apr 20, 2009 at 4:52 PM, Craig Sutherland <
> [email protected]> wrote:
>
>
> Hi Maddy,
>
> Your config looks pretty straight-forward, nothing obviously wrong
> there. I notice you're using a Nant task to build your project, so
> there is a possibility the problem lies there, but I'm not enough of a
> Nant expert to help in that area.
>
> Are you able to send us your log file? This is a file called ccnet.log
> in your application directory. If you don't want to send us your
> entire log, you could rename your current log, replicate your issue
> and then send us the log with just that information in it. This log
> will provide a better picture of what is happening in CC.Net.
>
>
> Craig
>
>
> On Apr 20, 10:45 pm, madhu nambiar <[email protected]> wrote:
> > Hi craig,
> >          can u please update the status on the issue posted here below
> link:
> >
> > http://jira.public.thoughtworks.org/browse/CCNET-1449
> >
> > My whole ccnet.config file is pasted below
> >
> > <cruisecontrol>
> >  <project name="VSAT">
> >  <sourcecontrol type="filtered">
> >    <sourceControlProvider type="filesystem">
> >     <repositoryRoot>C:\ThreePartition</repositoryRoot>
> >     <autoGetSource>true</autoGetSource>
> >     <ignoreMissingRoot>false</ignoreMissingRoot>
> > </sourceControlProvider>
> >  <exclusionFilters>
> >   <pathFilter>
> >
> <pattern>C:\ThreePartition\wrSbc750gx_ThreePartition\**</pattern>
> >       </pathFilter>
> >       <pathFilter>
> >    <pattern>C:\ThreePartition\*.txt</pattern>
> >       </pathFilter>
> >          </exclusionFilters>
> > </sourcecontrol>
> >
> >    <triggers>
> >             <intervalTrigger name="continuous" seconds="240"
> > buildCondition="IfModificationExists" />
> >     </triggers>
> >
> >   <tasks>
> >
> >      <nant>
> >         <executable>C:\Nant-0.85\bin\NAnt.exe</executable>
> >   <buildFile>nant.build</buildFile>
> >
> >       </nant>
> >  </tasks>
> >
> > with kind regards
> > Maddy
> > On Thu, Apr 16, 2009 at 1:55 PM, Craig & Sammi Sutherland <
> >
>
> > [email protected]> wrote:
> > >  That really depends on the IDE. If you are using Visual Studio there
> is a
> > > task for it:
>
> > >http://confluence.public.thoughtworks.org/display/CCNET/Visual+Studio..
> ..
>
> >
> > > Otherwise, you’ll have to search the documentation for the IDE.
> >
> > > Craig
> >
> > > *From:* [email protected] [mailto:
> [email protected]] *On
> > > Behalf Of *madhu nambiar
> > > *Sent:* Thursday, 16 April 2009 7:21 p.m.
> > > *To:* [email protected]
> > > *Subject:* [ccnet-user] Re: extract the contents of an IDE ??
> >
> > > yes craig,
> >
> > > i very much agree to that.But is der any other way by which u can just
> get
> > > the whole contents of an IDE??
> >
> > > wat about using AutoHotkey??
> >
> > > Maddy
> >
> > > On Thu, Apr 16, 2009 at 12:46 PM, Craig & Sammi Sutherland <
>
> > > [email protected]> wrote:
> >
> > > If you can't get the errors from your IDE into the text file, there is
>
> > > nothing CC.NET <http://cc.net/> <http://cc.net/> can do. 
> > > CC.NET<http://cc.net/><
> http://cc.net/> can only
>
> > > pick up the results from the file.
> >
> > > Craig
> >
> > > -----Original Message-----
> > > From: [email protected] [mailto:[email protected]]
> On
> > > Behalf Of Maddy
> > > Sent: Thursday, 16 April 2009 7:09 p.m.
> > > To: ccnet-user
> > > Subject: [ccnet-user] extract the contents of an IDE ??
> >
> > > Hi,
> > >  I am able to partially get the output of my IDE into some text file
> > > using the redirection operators in my batch files.But i am unable to
> > > get the errors which i had deliberately introduced so that i can get
> > > the log of my errors.
> >
> > > Can u plz help me out??
> >
> > > Thanks Stefen
>
>
>
>
>

Reply via email to