-----Original Message-----
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of william degnan
Sent: Wednesday, October 12, 2016 8:04 AM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk@classiccmp.org>
Subject: Re: Mark-8 opinion question

-------- Original message --------
From: william degnan <billdeg...@gmail.com>
Date: 2016-10-12  7:33 AM  (GMT-08:00)
To: "General Discussion: On-Topic and Off-Topic Posts" < cctalk@classiccmp.org>
Subject: Re: Mark-8 opinion question

My opinion...build it right using a reasonable set of parts from the era or 
just leave the boards alone.  I would be wary of winging it.


On Wed, Oct 12, 2016 at 10:56 AM, Brad H < vintagecompu...@bettercomputing.net> 

> That's pretty much my attitude.  I would never even consider building 
> these without correct, vintage parts.  And I can already see a number 
> of show stoppers.. including the 8263s.  I have some of those but 
> they're all
> 1977 vintage, which is okay for a clone but totally wrong otherwise.
>Basically you're in the position of having to source all of the parts from 
>that boards year, or earlier.  Then buy solder >from 1974.  When will it end?  
>How perfect?  Then what do you have?  This subject has come up before.

>If I was really into this project (I already have plenty!)...I'd make an 
>exhibit featuring the unpopulated boards next to a >replica that is running 
>with a teletype..


I think there is a tiny bit of leeway.  I have read of Mark-8s that were built 
as late as 1976.   This is kind of where all this stuff gets fuzzy.  Is a 1974 
Mark-8 project built in 1976 an 'original'?  Then supposing you have a 1974 
unit and one of the hard to replace chips dies.. I think standard practice is 
to replace it with whatever is available to get it working while keeping the 
original for show.  So there's a bit of wiggle room there also.

But taking a soldering iron to those pristine boards.  That's where I feel a 
line being drawn.

I kind of like your idea.  As a matter of fact, I just bought an ASR33 which is 
arriving today.  

Reply via email to