> On Feb 22, 2018, at 1:23 PM, dwight via cctalk <cctalk@classiccmp.org> wrote:
> 
> Do not remove the chip from the bias magnets. All will be lost if you do.

Is my understanding correct that removing the entire 7110 module as a unit 
(whether socketed or soldered in) should be somewhat safe, but any attempt to 
disassemble the module would likely disturb the bias field and destroy the data?


-- 
Mark J. Blair, NF6X <n...@nf6x.net>
http://www.nf6x.net/

Reply via email to