Ok. I'll claim it and we'll work on availability later. Worst caste,
I can come over after work on a weeknight of your chossing.
Steve
On 9/23/2018 6:47 PM, Bob Rosenbloom via cctalk wrote:
I can hold it but I will probably not be around on the weekends for
the next few weeks or so.
Bob
On 9/23/2018 1:03 PM, steve shumaker via cctalk wrote:
If you can hold it until the 6th, I can pick it up either Sat or Sun.
Steve
dOn 9/22/2018 2:21 PM, Bob Rosenbloom via cctalk wrote:
No, it's still available, come get it!
Bob
On 9/22/2018 1:35 PM, steve shumaker via cctalk wrote:
Ok.. I'll bite... Is the CDC/clone system spoken for yet?
Steve Shumaker
On 9/21/2018 7:44 PM, Bob Rosenbloom via cctalk wrote:
I have four 9-track tape drives, and a dirty DEC rack, that I need
to get rid of.
Two of the drives are HP 7970B's. One has the door unattached.
Then there's a Kennedy 9100 800/1600 bpi drive.
Very heavy. As found, none tested by me. Just don't have time to
play with them.
Last is a CDC drive complete with an AST clone PC with an Overland
Data controller and software. This
was running a few years ago but has not been used since. Has Media
Master format conversion software also.
There's also a smallish DEC rack. Could use the top painted but
otherwise not too bad. Includes four sets of rack
slides.
All are located in Santa Cruz, CA and need to be gone soon, I need
the room in my hangar. Come get them!
Photos here: http://dvq.com/fall_cleaning/
