I checked I do not have the OS disk, at least not in the obvious places. On Wed, Jun 12, 2019 at 1:30 PM Jonathan Haddox via cctalk < [email protected]> wrote:
> Sure, I will list out the hardware I'm planning on using. > IMS A645 Z-80 Processor > IMS A631 serial/parallel I/O > IMS A930 Floppy controller > IMS A465 64K RAM > IMS 1100 Winchester Hard disk controller > IMS 862 User Processor (Z80) > IMS 1081 User Processor (186) > IMS 1120 Tape Controller > Earth Computers ARCnet board > > -------------------------------------------- > On Tue, 6/11/19, Bill Degnan <[email protected]> wrote: > > Subject: Re: TurboDOS for S-100, IMS or L/F Technologies > To: "Jonathan Haddox" <[email protected]>, "General Discussion: > On-Topic and Off-Topic Posts" <[email protected]> > Date: Tuesday, June 11, 2019, 6:47 PM > > > > On Tue, Jun 11, > 2019, 12:55 PM Jonathan Haddox via cctalk <[email protected]> > wrote: > I'm > restoring an IMS - L/F Technologies S-100 Bus computer. > I've got all the pieces except for the Operating > System. I'm hoping that someone here may have a disk > stashed away. From the literature I have read, I would > need TurboDOS version 1.40a or 1.41c from IMS or L/F > Technologies. I've seen TurboDOS 1.3 versions out in > the wild from IMS, but the 1.4 version was greatly enhanced > and offered better compatibility with my specific > hardware. I'd be much obliged if anyone can help. > > > > Thanks, > > > > Jonathan > > new_castle_j at yahoo > > Can you detail the associated > hardware (drive controller, drive model, CPU, > etc.) > >
