did anything more ever turn up? I'd like to try getting a 16-bit 1.43 running, there is a set of disks on ebay, but the seller has blocked me https://www.ebay.com/itm/193098921854
On 6/28/19 7:17 PM, Jonathan Haddox via cctalk wrote: > Just sending a thanks for the replies from various folks on this list. I was > able to recover a partial set of operating system files for my > IMS/LF-Technologies S-100 machine from members who dug deep into their > archives. It's booting now to a basic single-user TurboDOS 1.4 which proves > that my hardware is sound. In order to get what I really want out of this > machine, I still need to source a full set of TurboDOS 1.4 drivers (.REL > files) from IMS L/F Tech distribution diskettes. I'll be around if they ever > turn up. > > Thank You! > > IMS A645 Z-80 Processor > IMS A631 serial/parallel I/O > IMS A930 Floppy controller > IMS A465 64K RAM > IMS 1100 Winchester Hard disk controller > IMS 862 User Processor (Z80) > IMS 1081 User Processor (186) > IMS 1120 Tape Controller On Tuesday, June 11, 2019, 11:55:29 AM CDT, > Jonathan Haddox <[email protected]> wrote: > > I'm restoring an IMS - L/F Technologies S-100 Bus computer. I've got all > the pieces except for the Operating System. I'm hoping that someone here may > have a disk stashed away. From the literature I have read, I would need > TurboDOS version 1.40a or 1.41c from IMS or L/F Technologies. I've seen > TurboDOS 1.3 versions out in the wild from IMS, but the 1.4 version was > greatly enhanced and offered better compatibility with my specific hardware. > I'd be much obliged if anyone can help. > > Thanks, > > Jonathan > new_castle_j at yahoo >
