I pulled my Pro380 out of storage after getting a replacement VR201 monitor. I connected it all together and on powerup I get the following display:
http://www.dittman.net/pro380/screen.jpg The tech manual says this is an error from slot 1 (the hard drive controller) and the error is "Non-existent memory trap occurred for longer than 20 seconds". I reseated all the cards. I noticed three ICs are missing on the hard drive controller but I don't know if they are empty or someone removed the ICs (I can't remember where I got this system). I can't find a picture of the controller to compare. The missing ICs can be seen here: http://www.dittman.net/pro380/missingics.jpg These are the installed option cards: http://www.dittman.net/pro380/cards.jpg Any ideas? -- Eric Dittman