Hi all,
I’m reassembling an H765 supply after cleaning and repairs. It has the "newer"
style 15V and power monitoring board (the one with the edge finger connector,
same as used in H7420 supplies.)
The board slides into a slot in a sub-chassis that also houses the power
control circuitry, which small chassis later slides into, and is secured to,
the larger H7420 chassis.
I cannot for the life of me figure out what, if anything, secures the power
monitor board to the small chassis! There don’t appear to be any conveniently
placed fixtures to which to screw down the board, and I haven’t been able to
inform myself by pondering the various engineering diagrams, IPB’s, nor the
pile of remaining fastening hardware...
When I test-fit everything in the larger chassis, the unsecured board is held
captive only by the grace of the surrounding wiring harness and by some small
clearance issues with the large cap on the board. This doesn't seem
satisfactory; as part of something like an 11/34 on tilt slides, it would seem
to bang around a bit in there if left loose like that.
Am I missing something? Puzzled...
--FritzM.
