If no one else knows off hand I can check later today, let me know. On Mon, Jan 18, 2021, 4:37 PM Fritz Mueller via cctalk < [email protected]> wrote:
> Hi all, > > I’m reassembling an H765 supply after cleaning and repairs. It has the > "newer" style 15V and power monitoring board (the one with the edge finger > connector, same as used in H7420 supplies.) > > The board slides into a slot in a sub-chassis that also houses the power > control circuitry, which small chassis later slides into, and is secured > to, the larger H7420 chassis. > > I cannot for the life of me figure out what, if anything, secures the > power monitor board to the small chassis! There don’t appear to be any > conveniently placed fixtures to which to screw down the board, and I > haven’t been able to inform myself by pondering the various engineering > diagrams, IPB’s, nor the pile of remaining fastening hardware... > > When I test-fit everything in the larger chassis, the unsecured board is > held captive only by the grace of the surrounding wiring harness and by > some small clearance issues with the large cap on the board. This doesn't > seem satisfactory; as part of something like an 11/34 on tilt slides, it > would seem to bang around a bit in there if left loose like that. > > Am I missing something? Puzzled... > > --FritzM. > > >
