On August 12, 2023 6:35:35 p.m. EDT, Peter Coghlan via cctalk
<[email protected]> wrote:
IIRC I had to jumper the second MFM drive as drive 4. Presumably I should
have made a twist in the cable to allow the second MFM drive to be configured
as drive 3, the same as the first drive.
On Sat, 12 Aug 2023, Nigel Johnson via cctalk wrote:
From memory, when I looked into doing this I found that the RQDX3 BA23
distribution panel maps DS2 from the contriller to all DS pins on the B
cable of one drive and DS3 to all DS lines on the other. I never did
test the theory though. I did not get a special adapter from
decromancer.
Hope it helps
Could y'all clarify for me,
Do you mean "drive 3" and "drive 4" of drives 1-4, or 0-3?
do you mean "DS2" and "DS3" of DS0-DS3, or DS1-DS4?
--
Grumpy Ol' Fred [email protected]
