>From: JR <[EMAIL PROTECTED]>
>I have a HP 7200 CDRW and am using PNY 80 minute 4x CDRs. This is an
>ATAPI CDRW and
>is on ide1 as a slave. There is no master drive on the ide1 interface.
>I have kernel 2.2.14 and using cdrecord v 1.9.
>I am getting the error regarding the power calibration area is full when
>trying to burn the cd at 2X. When
>I decrease it to 1X It burns ok even though it is supposed to be a 2x
>drive using 4x cdrs. Any ideas what i
>can do?
This is a known firmware bug.
Try to use different media.
>Total size: 757 MB (75:00.37) = 337528 sectors
>Lout start: 757 MB (75:02/28) = 337528 sectors
>Current Secsize: 2048
>ATIP start of lead in: -11625 (97:27/00)
>ATIP start of lead out: 359849 (79:59/74)
>Disk type: unknown
>Manuf. index: 81
>Manufacturer: ILLEGAL OLD CODE: Old Ritek Co.???
>Blocks total: 359849 Blocks current: 359849 Blocks remaining: 22321
>Starting to write CD/DVD at speed 2 in write mode for single session.
>Waiting for reader process to fill input buffer ...
>input buffer ready.
>Performing OPC...
>CDB: 54 01 00 00 00 00 00 00 00 00
>cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
>Sense Bytes: F0 00 03 00 00 00 00 19 00 0D 89 E7 73 02 00 00
>status: 0x2 (CHECK CONDITION)
>Sense Key: 0x3 Medium Error, Segment 0
>cdrecord: Resource temporarily unavailable. OPC failed.
>Sense Code: 0x73 Qual 0x02 (power calibration area is full) Fru 0x0
>Sense flags: Blk 0 (valid)
>--
>To UNSUBSCRIBE, email to [EMAIL PROTECTED]
>with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
