Hello,
I have a HP 7200 CDRW and am using PNY 80 minute 4x CDRs. This is an
ATAPI CDRW and
is on ide1 as a slave. There is no master drive on the ide1 interface.
I have kernel 2.2.14 and using cdrecord v 1.9.
I am getting the error regarding the power calibration area is full when
trying to burn the cd at 2X. When
I decrease it to 1X It burns ok even though it is supposed to be a 2x
drive using 4x cdrs. Any ideas what i
can do?
Thank you in advance!
JR
Total size: 757 MB (75:00.37) = 337528 sectors
Lout start: 757 MB (75:02/28) = 337528 sectors
Current Secsize: 2048
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 359849 (79:59/74)
Disk type: unknown
Manuf. index: 81
Manufacturer: ILLEGAL OLD CODE: Old Ritek Co.???
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 22321
Starting to write CD/DVD at speed 2 in write mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
CDB: 54 01 00 00 00 00 00 00 00 00
cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
Sense Bytes: F0 00 03 00 00 00 00 19 00 0D 89 E7 73 02 00 00
status: 0x2 (CHECK CONDITION)
Sense Key: 0x3 Medium Error, Segment 0
cdrecord: Resource temporarily unavailable. OPC failed.
Sense Code: 0x73 Qual 0x02 (power calibration area is full) Fru 0x0
Sense flags: Blk 0 (valid)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
