Hello, I've compiled and installed cdrecord-1.8.1. I've tried doing dummy
burns and I'm getting what looks to be a scsi error. I have a Matsushita
CW-7503, which is listed as a working drive.
First I tried it in dummy mode, then I took it off, but that didn't make a
difference. Any help someone can give is much appreciated.
Here are the error messages:
=======
[root@localhost bin]# ./cdrecord -v speed=1 dev=6,0 -pad -dummy -audio
/home/awbailey/right.wav
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
TOC Type: 0 = CD-DA
scsidev: '6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'MATSHITA'
Identifikation : 'CD-R CW-7503 '
Revision : '1.06'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1046640 = 1022 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 36 MB (03:36.42) no preemp pad
Total size: 36 MB (03:36.42) = 16232 sectors
Lout start: 36 MB (03:38/32) = 16232 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: 6
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Trying to clear drive status.
./cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 41 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
./cdrecord: Input/output error. read track info: scsi sendcmd: retryable
error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.008s timeout 240s
Writing time: 0.091s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.016s
./cdrecord: fifo had 128 puts and 0 gets.
./cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
=================
[root@localhost bin]# ./cdrecord -v speed=1 dev=6,0 -pad -dummy -audio
-dao /home/awbailey/right.wav
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
TOC Type: 0 = CD-DA
scsidev: '6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'MATSHITA'
Identifikation : 'CD-R CW-7503 '
Revision : '1.06'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 2090928 = 2041 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 36 MB (03:36.42) no preemp pad
Total size: 36 MB (03:36.42) = 16232 sectors
Lout start: 36 MB (03:38/32) = 16232 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: 6
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 321118
RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 332798
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
./cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
./cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 FF FF FF 6A 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset
occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
write track pad data: error after 0 bytes
./cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable
error
CDB: 5C 00 00 00 00 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
Starting new track at sector: 0
Track 01: 0 of 36 MB written../cdrecord: Input/output
error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 00 00 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 19.179s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
./cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
Trouble flushing the cache
Fixating time: 10.921s
./cdrecord: fifo had 128 puts and 1 gets.
./cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
=========
So then I tried it not in dummy mode, because of that one WARNING.
[root@localhost bin]# ./cdrecord -v speed=1 dev=6,0 -pad -audio -dao
/home/awbailey/right.wav
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
TOC Type: 0 = CD-DA
scsidev: '6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'MATSHITA'
Identifikation : 'CD-R CW-7503 '
Revision : '1.06'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 2090928 = 2041 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 36 MB (03:36.42) no preemp pad
Total size: 36 MB (03:36.42) = 16232 sectors
Lout start: 36 MB (03:38/32) = 16232 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: 6
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 321118
RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 332798
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
./cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
./cdrecord: Resource temporarily unavailable. OPC failed.
./cdrecord: fifo had 128 puts and 0 gets.
./cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[root@localhost bin]#
--
Alan Bailey
awbailey @ uiuc.edu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
