This is a response from long ago...like a month :)
I tried installing cdrtools-1.10, but I get errors from smake:
/software/source/cdrtools-1.10/./smake: Can't find any source for
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: Couldn't make
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: 'Makefile' does not say how to
make 'DIRNAME=SRCROOT/man'.
/software/source/cdrtools-1.10/./smake: Couldn't make
'DIRNAME=SRCROOT/man'.
==> MAKING "all" ON SUBDIRECTORY ".../man4"
/software/source/cdrtools-1.10/./smake: Can't find any source for
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: Couldn't make
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: 'Makefile' does not say how to
make 'DIRNAME=.../man4'.
/software/source/cdrtools-1.10/./smake: Couldn't make 'DIRNAME=.../man4'.
==> MAKING "all" ON SUBCOMPONENT ".../makefiles.mk"
/software/source/cdrtools-1.10/./smake: Can't find any source for
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: Couldn't make
'XARCH=i686-linux-cc'.
==> MAKING DIRECTORY OBJ/i686-linux-cc/man
==> LOCALIZING OBJ/i686-linux-cc/man/makefiles.5
==> MAKING "all" ON SUBCOMPONENT ".../makerules.mk"
/software/source/cdrtools-1.10/./smake: Can't find any source for
'XARCH=i686-linux-cc'.
/software/source/cdrtools-1.10/./smake: Couldn't make
'XARCH=i686-linux-cc'.
==> LOCALIZING OBJ/i686-linux-cc/man/makerules.5
/software/source/cdrtools-1.10/./smake: Couldn't make 'all'.
/software/source/cdrtools-1.10/./smake: Couldn't make 'all'.
./smake: Couldn't make 'all'.
isr6009|cdrtools-1.10 %
That doesn't help much. The README file for cdrtools-1.10 says:
This is Version 1.8.1 of cdrecord
which is odd...
Also, I downloaded the updated sg driver you wrote, but it just consists
of source
and include files, and no instructions on installation. I'm hoping to
install it as a module...
Here are the complete error messages for cdrecord-1.9:
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,6,0'
scsibus: 0 target: 6 lun: 0
Linux sg driver version: 2.1.36
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'MATSHITA'
Identifikation : 'CD-R CW-7503 '
Revision : '1.06'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 2090928 = 2041 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 36 MB (03:36.42) no preemp pad
Total size: 36 MB (03:36.42) = 16232 sectors
Lout start: 36 MB (03:38/32) = 16232 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -11839 (97:24/11)
ATIP start of lead out: 336075 (74:43/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 24
Manufacturer: SONY Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 319843
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.8 seconds.7
seconds.6 seconds.5 seconds.4 seconds.3
seconds.2 seconds.1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
/software/packages/cdrecord-1.9/bin/cdrecord: WARNING: Drive returns wrong startsec
(0) using -150
/software/packages/cdrecord-1.9/bin/cdrecord: Input/output error. write_g1: scsi
sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Writing pregap for track 1 at -150
CDB: 2A 00 FF FF FF 6A 00 00 1B 00
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
/software/packages/cdrecord-1.9/bin/cdrecord: Input/output error. read buffer cap:
scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
write track pad data: error after 0 bytes
CDB: 5C 00 00 00 00 00 00 00 0C 00
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
Starting new track at sector: 0
Track 01: 0 of 36 MB written./software/packages/cdrecord-1.9/bin/cdrecord:
Input/output error. write_g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
CDB: 2A 00 00 00 00 00 00 00 1B 00
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 47.451s
Fixating...
/software/packages/cdrecord-1.9/bin/cdrecord: Input/output error. flush cache: scsi
sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
CDB: 35 00 00 00 00 00 00 00 00 00
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid)
Trouble flushing the cache
Fixating time: 14.055s
/software/packages/cdrecord-1.9/bin/cdrecord: fifo had 64 puts and 1 gets.
/software/packages/cdrecord-1.9/bin/cdrecord: fifo was 0 times empty and 0 times full,
min fill was 100%.
Alan
On Wed, 21 Feb 2001 [EMAIL PROTECTED] wrote:
> >From: Alan Bailey <[EMAIL PROTECTED]>
>
> >Hello, I've got cdrecord 1.9 compiled and installed. I'm getting an error
> >when I try to burn a CD though, in both dummy mode and real mode. The
> >error messages are at the bottom of this message. The CD burner I have
> >(Matsushita CW-7503) seems to respond correctly, and the lights on the
> >drive light up correctly, but I don't know what these error messages mean.
> >This drive has been flaky in Windows, sometimes it would just disappear
> >and be unreachable within Windows. I would have to reboot to see the
> >drive.
> >Also in linux after a while, I get these messages in my /var/log/messages
> >file, and linux is unusable because these errors happen every five seconds
> >and lock up the mouse (and other things probably):
>
>
> >[root@isr6009 bin]# ./cdrecord -v speed=1 dev=6,0 -pad -dao -audio
> >/home/awbailey/right.wav
> >Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
>
> You are using an old version.
>
> Please read:
>http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
