Hi,
since a long time I try to configure the CD-burning on Mandrake, I
don't
have success until now. I tryed this on two completly different systems
- always the same.
Always when I try to burn, eg. with X-cd-roast, I get following error:
*************************************************************************************
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'IDE-CD '
Identifikation : 'ReWritable-2x2x6'
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
Current Secsize: 2048
ATIP start of lead in: -11598 (97:27/27)
ATIP start of lead out: 336601 (74:50/01)
Disk type: Phase change
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 336601 Blocks current: 336601 Blocks remaining: 336751
Starting to write CD/DVD at speed 1 in write mode for single session.
Blanking PMA, TOC, pregap
CDB: A1 01 00 00 00 00 00 00 00 00 00 00
cdrecord: Input/output error. blank unit: scsi sendcmd: retryable error
Sense Bytes: F0 00 05 00 00 00 00 19 00 00 B6 00 20 00 00 80
status: 0x2 (CHECK CONDITION)
Sense Key: 0x5 Illegal Request, Segment 0
cdrecord: Cannot blank disk, aborting.
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (valid) error refers to data part, bit ptr 0 (not
valid) field ptr 0
cmd finished after 11.021s timeout 9600s
CDB: 1B 00 00 00 02 00
cdrecord: Input/output error. start/stop unit: scsi sendcmd: retryable
error
Sense Bytes: F0 00 04 00 00 00 00 19 00 00 B6 03 53 00 00 80
status: 0x2 (CHECK CONDITION)
Sense Key: 0x4 Hardware Error, Segment 0
***************************************************************************
here the output from dmesg:
***************************************************************************
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: E-IDE Model: CD-ROM 50X Rev: 41
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: IDE-CD Model: ReWritable-2x2x6 Rev: 3.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 4x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
sr1: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
VFS: Disk change detected on device sr(11,0)
ISO 9660 Extensions: Microsoft Joliet Level 1
ISO 9660 Extensions: RRIP_1991A
***************************************************************************
In the past I had some experiences with SuSE (6.0) - I got it to work
there
but never on Mandrake and later SuSE-distributions.
Is there anything additional what I have to do ?
Thanks for any help
Udo
N�
I@R 隊[hq�+�z����-���y������+aj˛��-������r��y:蹹^
��i�e��fj�^��az�^n&���
