Hello!
Writing the 4th session on a CD an error occured. The error message
is below. What does this error message should tell me. Is it a hint
that I'm having hardware problems (e.g. the writer is old and dying)?
Or is it just somehting that might happen occasionally?
The first write attempt was at speed=4. After this failed attempt
I made an other (first-session) image and wrote it without any
problems on a new disk at speed=2.
The error message:
bash-2.04# /opt/schily/bin/cdrecord -v -multi speed=4 dev=1,6,0 imag.raw
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '1,6,0'
scsibus: 1 target: 6 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'YAMAHA '
Identifikation : 'CRW4260 '
Revision : '1.0j'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1176000 = 1148 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 56 MB
Total size: 64 MB (06:22.45) = 28684 sectors
Lout start: 64 MB (06:24/34) = 28684 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
ATIP start of lead in: -11250 (97:32/00)
ATIP start of lead out: 333975 (74:15/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 26
Manufacturer: TDK Corporation
Blocks total: 333975 Blocks current: 131860 Blocks remaining: 103176
RBlocks total: 345736 RBlocks current: 143621 RBlocks remaining: 114937
Starting to write CD/DVD at speed 4 in write mode for multi session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 202115
Track 04: 31 of 56 MB written (fifo 100%)./opt/schily/bin/cdrecord: Input/outpCDB:
2A 00 00 03 55 16 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 D1 C0 00 00 0A 00 00 00 00 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk -775946240 (not valid)
write track data: error after 33331200 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 65.945s
Fixating...
/opt/schily/bin/cdrecord: Input/output error. close track/session: scsi sendcmd:CDB:
5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 D1 C0 00 00 0A 00 00 00 00 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk -775946240 (not valid)
cmd finished after 17.387s timeout 480s
/opt/schily/bin/cdrecord: Input/output error. read disk info: scsi sendcmd: retrCDB:
51 00 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 240s
Fixating time: 19.396s
/opt/schily/bin/cdrecord: fifo had 589 puts and 526 gets.
/opt/schily/bin/cdrecord: fifo was 0 times empty and 522 times full,
min fill was 96%.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
