>Subject: Hardware problem?
>Writing the 4th session on a CD an error occured. The error message
>is below. What does this error message should tell me. Is it a hint
>that I'm having hardware problems (e.g. the writer is old and dying)?
>Or is it just somehting that might happen occasionally?
>The first write attempt was at speed=4. After this failed attempt
>I made an other (first-session) image and wrote it without any
>problems on a new disk at speed=2.
>The error message:
>bash-2.04# /opt/schily/bin/cdrecord -v -multi speed=4 dev=1,6,0 imag.raw
>Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
>TOC Type: 3 = CD-ROM XA mode 2
>scsidev: '1,6,0'
>scsibus: 1 target: 6 lun: 0
>Linux sg driver version: 2.1.38
>Using libscg version 'schily-0.1'
>atapi: 0
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 2
>Capabilities :
>Vendor_info : 'YAMAHA '
>Identifikation : 'CRW4260 '
>Revision : '1.0j'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Drive buf size : 1176000 = 1148 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: data 56 MB
>Total size: 64 MB (06:22.45) = 28684 sectors
>Lout start: 64 MB (06:24/34) = 28684 sectors
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> ATIP start of lead in: -11250 (97:32/00)
> ATIP start of lead out: 333975 (74:15/00)
>Disk type: Long strategy type (Cyanine, AZO or similar)
>Manuf. index: 26
>Manufacturer: TDK Corporation
>Blocks total: 333975 Blocks current: 131860 Blocks remaining: 103176
>RBlocks total: 345736 RBlocks current: 143621 RBlocks remaining: 114937
>Starting to write CD/DVD at speed 4 in write mode for multi session.
>Last chance to quit, starting real write in 1 seconds.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Performing OPC...
>Starting new track at sector: 202115
>Track 04: 31 of 56 MB written (fifo 100%)./opt/schily/bin/cdrecord: Input/outpCDB:
>2A 00 00 03 55 16 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 04 D1 C0 00 00 0A 00 00 00 00 09 01 00 00
>Sense Key: 0x4 Hardware Error, Segment 0
>Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
>Sense flags: Blk -775946240 (not valid)
Try to clean the lens or use different media.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
