>From: Russell Aspinwall <[EMAIL PROTECTED]>
>I downloaded and compiled the latest release of cdrecord, which only
>detects the drives on my first SCSI controller (AHA-2940U2W excludes
>DVD/CDROM Drive)
>Cdrecord 1.10a17 (i386-pc-solaris2.8) Copyright (C) 1995-2001 J�rg
>Schilling
>Warning: Using USCSI interface.
>Using libscg version 'schily-0.5'
>scsibus1:
> 1,0,0 100) 'SEAGATE ' 'ST34371N ' '0484' Disk
> 1,1,0 101) *
> 1,2,0 102) *
> 1,3,0 103) *
> 1,4,0 104) *
> 1,5,0 105) 'IBM ' 'DNES-309170W ' 'SA30' Disk
> 1,6,0 106) 'IBM ' 'DDRS-34560 ' 'S97B' Disk
> 1,7,0 107) *
>#
>As user a get the following message
>$ cdrecord -scanbus
>Cdrecord 1.10a17 (i386-pc-solaris2.8) Copyright (C) 1995-2001 J�rg
>Schilling
>Warning: Using USCSI interface.
>cdrecord: No such file or directory. Cannot open '/dev/rdsk/c2t4d0s2'.
>Cannot op
>en SCSI driver.
>cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
>are root.
>Any suggestions?
If you don't install the scg driver, cdrecord tries to use the Sun USCSI
interface. If you use the USCSI interface to new HW, you need to
run drvconfig, disks ... before
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
