Hi,
I have got Solaris to recongise the plextor CD-RW, I installed a CD and it
automatically brought up the contents in File Manager.
However cdrecord is still producing the same output below.
Regards
Russell
[EMAIL PROTECTED] wrote:
> >From: Russell Aspinwall <[EMAIL PROTECTED]>
>
> >I downloaded and compiled the latest release of cdrecord, which only
> >detects the drives on my first SCSI controller (AHA-2940U2W excludes
> >DVD/CDROM Drive)
>
> >Cdrecord 1.10a17 (i386-pc-solaris2.8) Copyright (C) 1995-2001 Jörg
> >Schilling
> >Warning: Using USCSI interface.
> >Using libscg version 'schily-0.5'
> >scsibus1:
> > 1,0,0 100) 'SEAGATE ' 'ST34371N ' '0484' Disk
> > 1,1,0 101) *
> > 1,2,0 102) *
> > 1,3,0 103) *
> > 1,4,0 104) *
> > 1,5,0 105) 'IBM ' 'DNES-309170W ' 'SA30' Disk
> > 1,6,0 106) 'IBM ' 'DDRS-34560 ' 'S97B' Disk
> > 1,7,0 107) *
> >#
>
> >As user a get the following message
>
> >$ cdrecord -scanbus
> >Cdrecord 1.10a17 (i386-pc-solaris2.8) Copyright (C) 1995-2001 Jörg
> >Schilling
> >Warning: Using USCSI interface.
> >cdrecord: No such file or directory. Cannot open '/dev/rdsk/c2t4d0s2'.
> >Cannot op
> >en SCSI driver.
> >cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
> >are root.
>
> >Any suggestions?
>
> If you don't install the scg driver, cdrecord tries to use the Sun USCSI
> interface. If you use the USCSI interface to new HW, you need to
> run drvconfig, disks ... before
>
> Jörg
>
> EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
> [EMAIL PROTECTED] (uni) If you don't have iso-8859-1
> [EMAIL PROTECTED] (work) chars I am J"org Schilling
> URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
