Hi Kevin,
Your NEC 465 is a CD-ROM (40x scsi internal) drive, I believe, but it's not
a CDR-W. So get a good CDR-W then try cdrecord again.
Look carefully through the Linux hardware DB for recommended CDR-Ws. My
Plextor 8432 works great on SuSE 7.1 (with cdrtools-1.11a01) and works very
well with the Cygwin port to Win9x/WinME.
The command line you used should work just fine.
Bill
KEVIN ZEMBOWER, on 04:29 PM 5/24/2001 -0400 you wrote:
>Bill, thanks very much for your suggestions.
>
>Darn, I thought I pasted in the output of cdrecord -scanbus, but I guess I
>didn't. Here's the output:
>centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc # ./cdrecord -scanbus
>Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
>Linux sg driver version: 2.1.39
>Using libscg version 'schily-0.5'
>scsibus0:
> 0,0,0 0) 'SEAGATE ' 'ST34573LC ' '5702' Disk
> 0,1,0 1) 'SEAGATE ' 'ST39173LC ' '5702' Disk
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>scsibus1:
> 1,0,0 100) *
> 1,1,0 101) *
> 1,2,0 102) *
> 1,3,0 103) *
> 1,4,0 104) *
> 1,5,0 105) 'NEC ' 'CD-ROM DRIVE:465' '1.03' Removable CD-ROM
> 1,6,0 106) 'ARCHIVE ' 'Python 04106-XXX' '715G' Removable Tape
> 1,7,0 107) *
>centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc #
>
>There's no "-" in front of the file. You might be seeing a "~" which
>stands for my home directory. Here's the output without the "~":
>
>centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc # ./cdrecord -v
>speed=2 dev=1,5,0 -data /root/tmp/binary-i386-3.iso
>Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '1,5,0'
>scsibus: 1 target: 5 lun: 0
>Linux sg driver version: 2.1.39
>Using libscg version 'schily-0.5'
>atapi: 0
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 2
>Capabilities : SYNC
>Vendor_info : 'NEC '
>Identifikation : 'CD-ROM DRIVE:465'
>Revision : '1.03'
>Device seems to be: Generic mmc CD-ROM.
>./cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found
>on this target.
>centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc #
>
>Also, I note that I use the option "-data" and in your suggestion, you
>don't. Is this significant?
>
>Bill, thanks, again for your offer of help.
>
>-Kevin Zembower
>
> >>> Bill Mudd <[EMAIL PROTECTED]> 05/24/01 12:07PM >>>
>What is the output of cdrecord -scanbus for your NEC?
>try:
>centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc # ./cdrecord -scanbus
>
>then use the numbers to the left of your NEC 465 drive for the "dev= "
>setting.
>Also did you use a "-" in front of the .iso file designation? Is the "-"
>part of the directory name?
>
>cdrecord dev=n,n,n -v speed=n1 your.iso
>(where n=scsibus/target/lun and n1=record speed and no "-" before the iso
>file name)
>
>Bill Mudd
>
>KEVIN ZEMBOWER, on 09:58 AM 5/24/2001 -0400 you wrote:
> >I'm having problems trying to burn my first CD with a NEC 465 drive. I
> >can't find any information about this drive from NEC, but I found it
> >listed on a few (but not many) lists of CD-R drives. Yet, the drive itself
> >doesn't have any lights or other attributes that makes me think it's a
> >CD-R. My main suggestion that it is comes from these lines in my dmesg:
> >
> >Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
> >(scsi1:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 15.
> > Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.03
> > Type: CD-ROM ANSI SCSI revision: 02
> >Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
> >sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray
> >
> >This seems to say that the NEC 465 is an mmc-compliant CD-RW.
> >
> >Yet, when I try to write to it, I get:
> >centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc # ./cdrecord -v
> >speed=2 dev=1,5,0 -data ~/tmp/binary-i386-3.iso
> >Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
> >TOC Type: 1 = CD-ROM
> >scsidev: '1,5,0'
> >scsibus: 1 target: 5 lun: 0
> >Linux sg driver version: 2.1.39
> >Using libscg version 'schily-0.5'
> >atapi: 0
> >Device type : Removable CD-ROM
> >Version : 2
> >Response Format: 2
> >Capabilities : SYNC
> >Vendor_info : 'NEC '
> >Identifikation : 'CD-ROM DRIVE:465'
> >Revision : '1.03'
> >Device seems to be: Generic mmc CD-ROM.
> >./cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found
> >on this target.
> >centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc #
> >
> >These lines from my /var/log/warn may be related. They were logged at the
> >same time as my attempt to record.
> >May 24 09:49:32 centernet kernel: paride: version 1.04 installed
> >May 24 09:49:32 centernet kernel: pg: pg version 1.02, major 97
> >May 24 09:49:32 centernet modprobe: modprobe: Can't locate module
> >paride_protocol
> >May 24 09:49:32 centernet kernel: pg0: Autoprobe failed
> >May 24 09:49:32 centernet kernel: pg: No ATAPI device detected
> >May 24 09:49:32 centernet insmod: /lib/modules/2.2.18/misc/pg.o:
> >init_module: Device or resource busy
> >May 24 09:49:32 centernet insmod: /lib/modules/2.2.18/misc/pg.o: insmod
> >char-major-97 failed
> >
> >I compiled cdrecord 1.11a01 using the version of make included with the
> >SuSE 7.1 distribution, which is on this host, instead of smake.
> >
> >Any ideas if I have a CD-RW, and if so, what I need to do to get it to work?
> >
> >Thanks for all your time and thought helping me with this problem.
> >
> >-Kevin Zembower
> >
> >-----
> >E. Kevin Zembower
> >Unix Administrator
> >Johns Hopkins University/Center for Communications Programs
> >111 Market Place, Suite 310
> >Baltimore, MD 21202
> >410-659-6139
> >
> >
> >--
> >To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> >with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
