I'm having problems trying to burn my first CD with a NEC 465 drive. I can't find any
information about this drive from NEC, but I found it listed on a few (but not many)
lists of CD-R drives. Yet, the drive itself doesn't have any lights or other
attributes that makes me think it's a CD-R. My main suggestion that it is comes from
these lines in my dmesg:
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi1:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
sr0: scsi3-mmc drive: 14x/32x cd/rw xa/form2 cdda tray
This seems to say that the NEC 465 is an mmc-compliant CD-RW.
Yet, when I try to write to it, I get:
centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc # ./cdrecord -v speed=2
dev=1,5,0 -data ~/tmp/binary-i386-3.iso
Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,5,0'
scsibus: 1 target: 5 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.5'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'NEC '
Identifikation : 'CD-ROM DRIVE:465'
Revision : '1.03'
Device seems to be: Generic mmc CD-ROM.
./cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this
target.
centernet:~/tmp/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc #
These lines from my /var/log/warn may be related. They were logged at the same time as
my attempt to record.
May 24 09:49:32 centernet kernel: paride: version 1.04 installed
May 24 09:49:32 centernet kernel: pg: pg version 1.02, major 97
May 24 09:49:32 centernet modprobe: modprobe: Can't locate module paride_protocol
May 24 09:49:32 centernet kernel: pg0: Autoprobe failed
May 24 09:49:32 centernet kernel: pg: No ATAPI device detected
May 24 09:49:32 centernet insmod: /lib/modules/2.2.18/misc/pg.o: init_module: Device
or resource busy
May 24 09:49:32 centernet insmod: /lib/modules/2.2.18/misc/pg.o: insmod char-major-97
failed
I compiled cdrecord 1.11a01 using the version of make included with the SuSE 7.1
distribution, which is on this host, instead of smake.
Any ideas if I have a CD-RW, and if so, what I need to do to get it to work?
Thanks for all your time and thought helping me with this problem.
-Kevin Zembower
-----
E. Kevin Zembower
Unix Administrator
Johns Hopkins University/Center for Communications Programs
111 Market Place, Suite 310
Baltimore, MD 21202
410-659-6139
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
