hi there...
i am running a redhat 7.0 distribution on a duron 600mhz with 128mb of ram
and an aopen 8x4x32x cd burner. i have had problems with the burner in the
past, so after uninstalling ver 9 of cdrecord and associated tools, i
installed the latest alpha version. i can burn a data cd after creating an
image file with mkisofs no problem. when i try to burn an audio disc, which
has just been captured with cdda2wav, it doesnt work. i get the error
message:
[root@muaddib dnb]# cdrecord -speed=8 -dev=0,0,0 -dao -v -dummy -audio
audio_*.wav
Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-R/RW 8X4X32 '
Revision : '5.DW'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
FIFO size : 4194304 = 4096 KB
Track 01: audio 67 MB (06:40.86) no preemp
Track 02: audio 80 MB (07:58.06) no preemp
Track 03: audio 76 MB (07:35.26) no preemp
Track 04: audio 59 MB (05:54.40) no preemp
Track 05: audio 54 MB (05:22.66) no preemp
Track 06: audio 57 MB (05:42.22) no preemp
Track 07: audio 81 MB (08:06.13) no preemp
Track 08: audio 66 MB (06:37.93) no preemp
Track 09: audio 78 MB (07:45.04) no preemp
Track 10: audio 64 MB (06:22.69) no preemp
Track 11: audio 38 MB (03:47.60) no preemp
Total size: 725 MB (71:52.89) = 323467 sectors
Lout start: 725 MB (71:54/67) = 323467 sectors
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
cdrecord: No disk / Wrong disk!
================
and then the red "write" light is still on, and refuses to go off. when i
execute an 'atip' i get the following:
[root@muaddib dnb]# cdrecord -dev=0,0,0 -atip
Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-R/RW 8X4X32 '
Revision : '5.DW'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
==============
whats going on here? why cant i burn an audio disc, but the data disc is
just fine? any ideas?
ivan.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
