Do you have the ide-scsi module setup correctly?
-----Original Message-----
From: Ivan Stegic [mailto:[EMAIL PROTECTED]]
Sent: May 29, 2001 12:04 AM
To: [EMAIL PROTECTED]
Subject: Re: peculiar error
the disc is in the drive. any other ideas?
----- Original Message -----
From: "Ivan Stegic" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 29, 2001 1:43 AM
Subject: peculiar error
: hi there...
:
: i am running a redhat 7.0 distribution on a duron 600mhz with 128mb of ram
: and an aopen 8x4x32x cd burner. i have had problems with the burner in the
: past, so after uninstalling ver 9 of cdrecord and associated tools, i
: installed the latest alpha version. i can burn a data cd after creating an
: image file with mkisofs no problem. when i try to burn an audio disc,
which
: has just been captured with cdda2wav, it doesnt work. i get the error
: message:
:
: [root@muaddib dnb]# cdrecord -speed=8 -dev=0,0,0 -dao -v -dummy -audio
: audio_*.wav
: Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg
Schilling
: TOC Type: 0 = CD-DA
: scsidev: '0,0,0'
: scsibus: 0 target: 0 lun: 0
: Linux sg driver version: 2.1.38
: Using libscg version 'schily-0.5'
: atapi: 1
: Device type : Removable CD-ROM
: Version : 0
: Response Format: 1
: Vendor_info : 'ATAPI '
: Identifikation : 'CD-R/RW 8X4X32 '
: Revision : '5.DW'
: Device seems to be: Generic mmc CD-RW.
: Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
: Driver flags : SWABAUDIO
: FIFO size : 4194304 = 4096 KB
: Track 01: audio 67 MB (06:40.86) no preemp
: Track 02: audio 80 MB (07:58.06) no preemp
: Track 03: audio 76 MB (07:35.26) no preemp
: Track 04: audio 59 MB (05:54.40) no preemp
: Track 05: audio 54 MB (05:22.66) no preemp
: Track 06: audio 57 MB (05:42.22) no preemp
: Track 07: audio 81 MB (08:06.13) no preemp
: Track 08: audio 66 MB (06:37.93) no preemp
: Track 09: audio 78 MB (07:45.04) no preemp
: Track 10: audio 64 MB (06:22.69) no preemp
: Track 11: audio 38 MB (03:47.60) no preemp
: Total size: 725 MB (71:52.89) = 323467 sectors
: Lout start: 725 MB (71:54/67) = 323467 sectors
: cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
: CDB: 00 00 00 00 00 00
: status: 0x2 (CHECK CONDITION)
: Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
: Sense Key: 0x2 Not Ready, Segment 0
: Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
: Sense flags: Blk 0 (not valid)
: cmd finished after 0.000s timeout 200s
: cdrecord: No disk / Wrong disk!
:
: ================
: and then the red "write" light is still on, and refuses to go off. when i
: execute an 'atip' i get the following:
:
:
: [root@muaddib dnb]# cdrecord -dev=0,0,0 -atip
: Cdrecord 1.11a01 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg
Schilling
: scsidev: '0,0,0'
: scsibus: 0 target: 0 lun: 0
: Linux sg driver version: 2.1.38
: Using libscg version 'schily-0.5'
: Device type : Removable CD-ROM
: Version : 0
: Response Format: 1
: Vendor_info : 'ATAPI '
: Identifikation : 'CD-R/RW 8X4X32 '
: Revision : '5.DW'
: Device seems to be: Generic mmc CD-RW.
: Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
: Driver flags : SWABAUDIO
: cdrecord: Input/output error. test unit ready: scsi sendcmd: no error
: CDB: 00 00 00 00 00 00
: status: 0x2 (CHECK CONDITION)
: Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
: Sense Key: 0x2 Not Ready, Segment 0
: Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
: Sense flags: Blk 0 (not valid)
: cmd finished after 0.000s timeout 40s
: cdrecord: No disk / Wrong disk!
:
: ==============
:
: whats going on here? why cant i burn an audio disc, but the data disc is
: just fine? any ideas?
:
: ivan.
:
:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
