>From: Georg Koss <[EMAIL PROTECTED]>
>I installed my brand-new Plextor 16/10/40 ATAPI CD-RW today on my
>Apple-G4/DebianGNU/Linux-Box running Woody (rsync-kernel 2.4.7-pre7
>from BenH-tree).
>Scsi-ide enabled, cdrecord -scanbus found the device at 0,0,0 - so far
>so good.
>When I tried=20
>cdrecord -v -dummy fs=3D10m driveropts=3Dburnproof speed=3D16 ./foo.iso
>it fails with following output (complete -v output at the mail-end):
>cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error=
>=20
>CDB: 55 10 00 00 00 00 00 00 10 00
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
>Sense flags: Blk 0 (not valid)=20
>cmd finished after 0.000s timeout 40s
>DMA addr: 0x00000000 size: 0 - using copy buffer
>cdrecord: fifo had 156 puts and 156 gets.
>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>In the man cdrecord I read the diagnosis-chapter without success
>(couldn't find scsierrs.c on my system BTW - where do I have to look
>for).
>Cdrecord 1.9 (powerpc-unknown-linux-gnu) Copyright (C) 1995-2000 J=F6rg Sch=
>illing
A general note: if you have problems, you never should use outdated versions...
http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
