Hello again!
I installed my brand-new Plextor 16/10/40 ATAPI CD-RW today on my
Apple-G4/DebianGNU/Linux-Box running Woody (rsync-kernel 2.4.7-pre7
from BenH-tree).
Scsi-ide enabled, cdrecord -scanbus found the device at 0,0,0 - so far
so good.
When I tried
cdrecord -v -dummy fs=10m driveropts=burnproof speed=16 ./foo.iso
it fails with following output (complete -v output at the mail-end):
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
DMA addr: 0x00000000 size: 0 - using copy buffer
cdrecord: fifo had 156 puts and 156 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
In the man cdrecord I read the diagnosis-chapter without success
(couldn't find scsierrs.c on my system BTW - where do I have to look
for).
So my question is, what kind of error happens here. Is that a problem
of missing driver (have to use the generic scsi) or what else is going
on here.
If problem origins by the generic driver, so I'd like to try writing
one but I never did this. So I'd like to ask you about all hints and
tipps you'll willing to give me (patches, URL's, books,...) to be
successful.
Thanks in advance for your help -
cdrecord -v .... output:
Cdrecord 1.9 (powerpc-unknown-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.19
Using libscg version 'schily-0.1'
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1610A'
Revision : '1.02'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1190112 = 1162 KB
FIFO size : 10485760 = 10240 KB
Track 01: data 9 MB
Total size: 10 MB (01:04.10) = 4808 sectors
Lout start: 11 MB (01:06/08) = 4808 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11324 (97:31/01)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 331267 Blocks remaining: 326459
Starting to write CD/DVD at speed 16 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds.8 seconds.7
seconds.6 seconds.5 seconds.4 seconds.3
seconds.2 seconds.1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 4958
Track 01: 0 of 9 MB written.
Track 01: 1 of 9 MB written (fifo 100%).
Track
01: 2 of 9 MB written (fifo 100%).
Track 01: 3 of 9 MB written (fifo 100%).
Track 01: 4 of 9 MB written (fifo 100%).
Track 01: 5 of 9 MB written (fifo
100%).
Track 01: 6 of 9 MB written (fifo 100%).
Track 01: 7 of 9 MB written
(fifo 100%).
Track 01: 8 of 9 MB written (fifo 100%).
Track 01: 9 of 9 MB
written (fifo 100%).
Track 01: Total bytes read/written: 9842688/9842688 (4806 sectors).
Writing time: 7.770s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.001s
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
TIA and
Cheers
---
mfg
Georg Koss
mailto: [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
