(why the hell does this list not accept my mail ?! I
already sent it two times ?!? I have subscribed successfully
, I get lots of mails of this list ! My mails seem to be purged
without reason )
Hello,
can somebody tell me why I get with HP 9200+ 1.0e the error
cdrdao simulate -v 5 --buffers 100 --driver generic-mmc --device 0,1,0
--speed 2 data.toc
...
Starting write simulation ERROR: Requested mode page exceeds provided
buffer size.
ERROR: Cannot retrieve CD capabilities mode page.
...
cdrdao: Input/output error. : scsi sendcmd: retryable error
...
The burner is supported with generic-mmc according to
http://cdrdao.sourceforge.net/drives.html
I generated data.wav with cdparanoia and data.toc with cdrdao.
thx
Ekkard
P.S. the exact protocol of cdrdao simulate ...
cdrdao simulate -v 5 --buffers 100 --driver generic-mmc --device 0,1,0
--speed 2 data.toc
0,1,0: HP CD-Writer+ 9200 Rev: 1.0e
Using driver: Generic SCSI-3/MMC - Version 1.0 (data) (options 0x0000)
Starting write simulation ERROR: Requested mode page exceeds provided
buffer size.
ERROR: Cannot retrieve CD capabilities mode page.
at speed 0...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Lead-in start: 97:31:01 length: 11174
Lead-out length: 6750
Swap: 1
Using POSIX real time scheduling.
Memory locked
Waiting for reader process
Buffer filled
Awaken, will start writing
Multi session mode: 0
Session format: 0
Toc type: 0x0
Executing power calibration...
Track is Blank, Next Writable Address is valid
NWA: 0
Cue Sheet:
CTL/ TNO INDEX DATA SCMS MIN SEC FRAME
ADR FORM
02 30 30 30 30 48 48 48
02 30 30 30 30 48 48 00
01 00 00 01 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 33
01 02 01 00 00 02 46 18
01 03 01 00 00 05 37 20
01 04 01 00 00 08 33 10
01 05 01 00 00 12 16 03
01 06 01 00 00 15 38 35
01 07 01 00 00 19 07 00
01 08 01 00 00 21 53 38
01 09 01 00 00 24 38 28
01 0a 01 00 00 27 09 00
01 0b 01 00 00 29 48 50
01 0c 01 00 00 32 24 20
01 0d 01 00 00 36 21 00
01 0e 01 00 00 39 14 20
01 0f 01 00 00 42 30 13
01 10 01 00 00 45 46 30
01 11 01 00 00 49 11 30
01 aa 01 01 00 51 20 20
Writing track 01 (mode AUDIO/AUDIO)...
Wrote 3 of 517 MB (Buffer 100%).
cdrdao: Input/output error. : scsi sendcmd: retryable error
CDB: 2A 00 00 00 06 4E 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0
(not valid) field
ptr 0
ERROR: Write data failed.
ERROR: Writing failed - buffer under run?
ERROR: Simulation failed.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
