Am Fre, 2001-10-12 um 14.17 schrieb 1002889047: > > On 12-Oct-01 Alexander Feigl wrote: > > Somebody told me something similar happens with > > Plextor PX40 and cdda2wav. > > Hi, > > I've no idea whats happening in your case, but I can say that Ultra Plex 40 > (Ultra-SCSI, narrow (i.e. non wide) connector) is working fine with cdrecord > and cdda2wav.
Did you try to read the TOC of a data CD-ROM with cdda2wav too? It might sound stupid to use cdda2wav to read the TOC of a data CD-ROM, but a CD recording front end cannot know if there is a data CD-ROM or a CDDA inserted in the drive. It might be a problem with the SCSI controllers we use. Which controller do you use? > > Your Adaptec 2940U2W SCSI controller probably has 2 channles, one U2W (LVD > mode), one UW (SE mode). Your CDR drives will only run in SE mode and maybe > you should use that connector. And check the terminators on the drives as > well as the automatically(?) detected termination on the card (channels). > I connected both drives to the SE mode connector. And termination should be Ok. Everything works - from high data rate CD ripping to reading TOC with cdda2wav. I checked aic7xxx verbose output to check if the automatic terminators on the SCSI controller are correct too. 3 things have to come together to cause the problem : 1) I use cdrecord -toc to read the TOC 2) a CDDA disk is inserted in my drive 3) I use my Plextor PX32TS If I change any of these 3 items, it works without problems. Alexander Feigl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
