>From: Dirk Pritsch <[EMAIL PROTECTED]>

>a friend of mine had problems with her cd burner under windows, so we
>tried it on my machine under Linux, but also ran in trouble. So I'd like
>to know if this could be a hardware failure. I don't believe in a
>defective medium as we tried different ones. 


>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Cdrecord 1.11a05 (i586-pc-linux-gnu) Copyright (C) 1995-2001 J�rg
>Schilling
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.5'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 1
>Vendor_info    : 'RICOH   '
>Identifikation : 'CD-R/RW MP7060A '
>Revision       : '1.50'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags   : SWABAUDIO 
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
>Drive buf size : 1359872 = 1328 KB
>FIFO size      : 25165824 = 24576 KB
>Linux sg driver version: 3.1.22
>Track 01: data  432 MB         padsize:  30 KB
>Lout start:     497 MB (49:17/38) = 221663 sectors
>Current Secsize: 2048
>ATIP info from disk:
>Indicated writing power: 5
>Is not unrestricted
>Is not erasable
>Disk sub type: Medium Type B, low Beta category (B-) (4)
>ATIP start of lead in:  -11606 (97:27/19)
>ATIP start of lead out: 359849 (79:59/74)
>Disk type:    Short strategy type (Phthalocyanine or
>similar)
>Manuf. index: 18
>Manufacturer: Plasmon Data systems Ltd.
>Blocks total: 359849 Blocks current: 359849 Blocks
>remaining: 138186
>Starting to write CD/DVD at speed 6 in write mode for single
>session.
>Performing OPC...
>Sending CUE sheet...
>/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
>Writing pregap for track 1 at -150
>Track 01:  82 of 432 MB written.
>/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
>CDB:  2A 00 00 00 84 1D 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 71 00 03 00 00 00 00 0C 00 00 00 00 0C 00 00 00
>Sense Key: 0x3 Medium Error, deferred error, Segment 0
>Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>Sense flags: Blk 0 (not valid) 
>cmd finished after 5.779s timeout 200s
>write track data: error after 69265408 bytes

Try to clean the lens.


J�rg

 EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
       [EMAIL PROTECTED]               (uni)  If you don't have iso-8859-1
       [EMAIL PROTECTED]           (work) chars I am J"org Schilling
 URL:  http://www.fokus.gmd.de/usr/schilling   ftp://ftp.fokus.gmd.de/pub/unix
,


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to