>From: Giuseppe Corbelli <[EMAIL PROTECTED]>
>> I try to setup a Rico MP9060A DVD/CD-RW drives via an external ieee1394
>> connection. I have a 2.4.10 Kernel(Suse 7.3 distribution). When i load the
>> kernelmodules for iee1394(ieee1394,ohci1394,sbp2) everything seems to be ok.
>> I can mount CD's. The CD-Combo is detected as SCSI Drive 1.
>> But when i start cdrecord(cdrecord -scanbus) the system hangs? According to the
>attached part
>> of the /var/log/messages there is a problem with the paride/pg kernel module?
>>
>>
>> Can somebody help me or had some similiar experience and found a way out?
>...
>> Feb 5 22:14:47 pc modprobe: modprobe: Can't locate module paride_protocol
>...
>I have no direct experience but this line seems to suggest you need the
>right low level module, as found in
>Block Devices->Parallel Ide Protocol Modules
If you really have IEEE1394 problems, write to a 1394 related Linux group.
If you have problems with PP kernel error messages that should be suppressed by
the Linux kernel write to Linux PAride.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
