On Fri, 08 Feb 2002, Joerg Schilling wrote:
> >From: Giuseppe Corbelli <[EMAIL PROTECTED]>
>
> >> I try to setup a Rico MP9060A DVD/CD-RW drives via an external ieee1394
> >> connection. I have a 2.4.10 Kernel(Suse 7.3 distribution). When i load the
> >> kernelmodules for iee1394(ieee1394,ohci1394,sbp2) everything seems to be ok.
> >> I can mount CD's. The CD-Combo is detected as SCSI Drive 1.
> >> But when i start cdrecord(cdrecord -scanbus) the system hangs? According to the
>attached part
> >> of the /var/log/messages there is a problem with the paride/pg kernel module?
> >>
> >>
> >> Can somebody help me or had some similiar experience and found a way out?
> >...
> >> Feb 5 22:14:47 pc modprobe: modprobe: Can't locate module paride_protocol
> >...
> >I have no direct experience but this line seems to suggest you need the
> >right low level module, as found in
> >Block Devices->Parallel Ide Protocol Modules
>
> If you really have IEEE1394 problems, write to a 1394 related Linux group.
>
>
> If you have problems with PP kernel error messages that should be suppressed by
> the Linux kernel write to Linux PAride.
>
> J�rg
Is the FireWire interface indeed handled via the paride module?
Kind regards
Carsten
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
