Joerg Schilling <[EMAIL PROTECTED]> wrote [12:41pm +0200] JS > >From: [EMAIL PROTECTED] JS > JS > JS > >> Vendor_info : 'PIONEER ' JS > >> Identifikation : 'DVD-RW DVR-103 ' JS > >> Revision : '1.55' JS > >> Device seems to be: Generic mmc2 DVD. JS > >> Using generic SCSI-3/mmc CD-R driver (mmc_cdr). JS > >> Driver flags : SWABAUDIO JS > >> Drive buf size : 1251328 =3D 1222 KB JS > >> FIFO size : 8388608 =3D 8192 KB JS > >> Track 01: data 35 MB JS > >> Total size: 41 MB (04:05.14) =3D 18386 sectors JS > >> Lout start: 41 MB (04:07/11) =3D 18386 sectors JS > >> cdrecord: Input/output error. test unit ready: scsi sendcmd: no error JS > >> CDB: 00 00 00 00 00 00 JS > >> status: 0x2 (CHECK CONDITION) JS > >> Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 30 00 00 00 JS > >> Sense Key: 0x2 Not Ready, Segment 0 JS > >> Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0 JS > >> Sense flags: Blk 0 (not valid) JS > >> cmd finished after 0.005s timeout 40s JS > >> cdrecord: No disk / Wrong disk! JS > JS > >Are you sure you use on of the cdrecord variants capable of writing DVDs? JS > >ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ProDVD/ JS > JS > >It seems you try to burn a CD-R with an incompatible medium in your JS > >drive (DVD-R or similiar or even a CD-ROM?) JS > JS > JS > This problem will definitely not change with a DVD capable writing program. JS > It may be cause by using DVD+R media :-( JS > JS > ... of course, if the drive likes the media at all, you need cdrecord-ProDVD
OK, that was it. I didn't notice that. Thanks everyone a lot. m4c. __________________________________________________________ Equipo T�cnico de Laboratorios: Gregorio Corral Torres Esteban Garc�a Cuesta Marcos Lorenzo de Santiago Iv�n Alonso Guti�rrez __________________________________________________________ Departamento de Ingenier�a Telem�tica Edificio Torres Quevedo 4.1A01 Tfno:91-624-8757 Escuela Polit�cnica Superior Universidad Carlos III Av.Universidad 30 Legan�s (Madrid). __________________________________________________________ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
