>From: Ed Vazquez <[EMAIL PROTECTED]>
>Problem:
>The old (1.11a12) version successfully creates CD-RWs that are
>readable, bootable, etc. by all OS's here, the new version (2.0x) does
>not.
First, it would help a lot to save my time if you had decribed your problem.....
>Media:
>Ricoh CD-RW Type 74 650Mb
>On running a "cdrecord dev=3D1,1,0 -blank fast -v" I get:
>Cdrecord 2.01a15 (i686-pc-cygwin) Copyright (C) 1995-2003 J=F6rg
>Schilling
>TOC Type: 1 =3D CD-ROM
>scsidev: '1,1,0'
>scsibus: 1 target: 1 lun: 0
>Using libscg version 'schily-0.7'
>atapi: -1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : '_NEC '
>Identifikation : 'CD-RW NR-9300A '
>Revision : '105B'
>Device seems to be: Generic mmc CD-RW.
>Current: 0x000A
>Profile: 0x000A (current)
>Profile: 0x0009
>Profile: 0x0008 (current)
>Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>Driver flags : MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 1226752 =3D 1198 KB
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 5
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in: -11625 (97:27/00)
> ATIP start of lead out: 333750 (74:12/00)
> 1T speed low: 2 1T speed high: 2
> power mult factor: 5 6
> recommended erase/write power: 3
> A1 values: 11 5C B0
>Disk type: Phase change
>Manuf. index: 0
>Manufacturer: Illegal Manufacturer code
>cdrecord: Write speed 2 of medium not sufficient for this writer.
>cdrecord: You may have used an ultra low speed medium on a high speed
>writer.
I cannot believe that this should be a ricoh media.
You need to repeat this with -vv
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
