>From [EMAIL PROTECTED] Thu Jun 12 18:23:37 2003
>Here is the additional output you requested, the CD-RW is a RICOH,
>printed with blue silkscreen ink, reading (from the top):
>CD-RW COMPACT DISC REWRITABLE RICOH RICOH COMPANY, LTD. MADE IN JAPAN
>TYPE 74 650MB
>I have an even dozen of them, bought at the same time as a 100 count
>stack of standard CD-R media from the RICOH online store. The serial
>numbers all vary in the last five digits, but the start series is:
>R2197302xxxxx.
>The same behaviour occurs on every CD-RW I have (currently only
>RICOH). I am searching for another brand to try that and will post
>once I have procured and tested.
>$ cdrecord dev=3D1,1,0 -speed=3D4 -blank fast -vv
>Cdrecord 2.01a15 (i686-pc-cygwin) Copyright (C) 1995-2003 J=F6rg
>Schilling
>TOC Type: 1 =3D CD-ROM
>scsidev: '1,1,0'
>scsibus: 1 target: 1 lun: 0
>Using libscg version 'schily-0.7'
>Using libscg transport code version 'schily-scsi-wnt.c-1.29'
>atapi: -1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : '_NEC '
>Identifikation : 'CD-RW NR-9300A '
>Revision : '105B'
>Device seems to be: Generic mmc CD-RW.
>Current: 0x000A
>Profile: 0x000A (current)
>Profile: 0x0009
>Profile: 0x0008 (current)
>Drive current speed: 4
>Drive default speed: 4
>Drive max speed : 4
>Selected speed : 4
>Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>Driver flags : MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 1226752 =3D 1198 KB
> 01 00 00 01 00 00 00 00
> 01 AA 01 01 00 00 00 00
>Track 1 start -150
> 01 00 A0 00 00 00 00 01 00 00 00 00
> 01 00 A1 00 00 00 00 00 00 00 00 00
> 01 00 A2 00 00 00 00 00 00 00 00 00
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 5
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in: -11625 (97:27/00)
> ATIP start of lead out: 333750 (74:12/00)
> 1T speed low: 2 1T speed high: 2
> power mult factor: 5 6
> recommended erase/write power: 3
> A1 values: 11 5C B0
>Disk type: Phase change
>Manuf. index: 0
>Manufacturer: Illegal Manufacturer code
>cdrecord: Write speed 2 of medium not sufficient for this writer.
>cdrecord: You may have used an ultra low speed medium on a high speed
>writer.
Well, cdrecord is correct.
In most cases writing a 2x media at 4x would damage the media.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
