James Finnall wrote:
On Monday 15 December 2003 06:00, Joerg Schilling wrote:
Did you try cdrecord-ProDVD?
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
J�rg
The drive appears to back to functioning once again. I had to
reboot several times. I was able to do what I wanted to do though
and that was to burn the same image using sdd. I hadn't actaully
tried it. Probably because I didn't think it was that much
different than growisofs. But sdd also has the same problem that
after it burns the media, it is not readable.
I have seen firmware in CD (and old SCSI drives) which got so hosed the
drive needed a power cycle to clear its head. So a reboot might not
always fix the drive, but a power cycle would. Okay, I hate to p/c my
system board, I have been known to unplug a drive (NOT recommended). If
you run Linux you can try powering down the interface with hdparm, I
remember that was discussed WRT hot swapping IDE drives, needing to
unpower the drive and the cable. WARNING: may take a p/c to recover, may
hang your system, do NOT do it if you have a disk drive on the same
cable. That's a bad idea anyway, of course.
--
E. Robert Bogusta
It seemed like a good idea at the time
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
