After upgrading to SuSE 9.1, kernel 2.6.5, burning CDs with my old Philips CDD522 (2-speed, no rude comments please) SCSI burner no longer works.
Command: cdrecord -v dev=/dev/sr0 speed=2 -pad padsize=10x75s -data -dummy x.iso ================================================================================ cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 cdrecord: Warning: using inofficial libscg transport code version ([EMAIL PROTECTED] '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable WORM Version : 1 Response Format: 2 Capabilities : Vendor_info : 'KODAK ' Identifikation : 'PCD225 ' Revision : '1.07' Device seems to be: Philips CDD-522. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO FIFO size : 4194304 = 4096 KB cdrecord: Warning: blockdesc secsize 2048 differs from cap secsize 0 cdrecord: Warning: controller returns zero sized Speed/Dummy information page. cdrecord: Warning: controller returns wrong size for Speed/Dummy information page. cdrecord: Warning: controller returns wrong page 0 for Speed/Dummy information page (23). cdrecord: Cannot init drive. [it reads ATIP info correctly] Command: cdrecord -v dev=0,5,0 speed=2 -pad padsize=10x75s -data -dummy suse90-cd2.iso ================================================================================ cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... scsidev: '0,5,0' scsibus: 0 target: 5 lun: 0 Linux sg driver version: 3.5.30 cdrecord: Warning: using inofficial libscg transport code version ([EMAIL PROTECTED] '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 0 Device type : Removable WORM Version : 1 Response Format: 2 Capabilities : Vendor_info : 'KODAK ' Identifikation : 'PCD225 ' Revision : '1.07' Device seems to be: Philips CDD-522. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO FIFO size : 4194304 = 4096 KB cdrecord: Cannot load media. Track 01: data 644 MB padsize: 1 MB Total size: 742 MB (73:31.94) = 330896 sectors Lout start: 742 MB (73:33/71) = 330896 sectors -------------------------------------------------------------------------------- Exit status: 255 Thinking this may be due to SusE's butchered version, I tried J�rg's: cdrecord-dvd -dummy dev=/dev/sr0 -data -tao suse90-cd1.iso ======================================================================== scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Sorry, no CD/DVD-Drive found on this target. Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use Using libscg version 'schily-0.8'. Device type : Disk Version : 0 Response Format: 0 Vendor_info : 'ADAPTEC ' Identifikation : 'ACB-5500 ' Revision : 'FAKE' Device seems to be: Adaptec 5500. ------------------------------------------------------------------------ Command exited with status 255. [Wow - where did that drive come from?] cdrecord-dvd -dummy dev=/dev/sr0 -data -tao suse90-cd1.iso ======================================================================== scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use Using libscg version 'schily-0.8'. Device type : Removable WORM Version : 1 Response Format: 2 Capabilities : Vendor_info : 'KODAK ' Identifikation : 'PCD225 ' Revision : '1.07' Device seems to be: Philips CDD-522. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Cannot load media. ------------------------------------------------------------------------ Command exited with status 255. cdrecord-dvd -dummy dev=0,5,0 -data -tao /media/more/suse90/suse90-cd1.iso ======================================================================== ... Vendor_info : 'KODAK ' Identifikation : 'PCD225 ' Revision : '1.07' Device seems to be: Philips CDD-522. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Warning: blockdesc secsize 2048 differs from cap secsize 0 cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Warning: controller returns zero sized Speed/Dummy information page. cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Warning: controller returns wrong size for Speed/Dummy information page. cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Warning: controller returns wrong page 0 for Speed/Dummy information page (23). cdrecord-prodvd-2.01b31-i686-pc-linux-gnu: Cannot init drive. ------------------------------------------------------------------------ Command exited with status 255. Same problem. The 2 scanners on the same SCSI bus work fine as before. I can mount media in the CDD522 just fine. The drive is built like a brick sh**house and just works. No need wearing out the new burner when there's plenty of time. A bit ironic really that working stuff is forced on the scrap heap because of Linux problems, given the latter's reputation as saviour of old hardware. Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
