Vasileios Gkanis <[EMAIL PROTECTED]> wrote: > > cdrecord has a special option for this case: -immed (see man page) > I burned some data (4.3GB) on two discs. The first disc was burned with the > "-immed" option and the second disc was not. Unfortunately, the first disc > was lost, some of the data can not be read. Both discs were burned at an > average speed of ~2x and the maximum speed was ~4x. But, when I used the > "-immed" option I burned only 100MB at ~4x, and then the speed dropped to > ~2x. When I did not use this option I burned about 500MB at ~4x, and then > again the speed dropped to ~2x. Interestingly, the speed increased from ~2x > to ~4x when about 500MB were already written on the disc. But before it > increased, the hard disk stopped transfering any data, the speed dropped to > ~0.1x and stayed there for a couple of seconds, and then it increased to 4x. > > Do all these make sense? Do you think this is normal?
Without any information nobody can help you http://cdrecord.berlios.de/old/private/problems.html Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED] (uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
