On Thu, Apr 10, 2008 at 11:42 PM, Thomas Schmitt <[EMAIL PROTECTED]> wrote:
> http://scdbackup.sourceforge.net/cdrskin-0.4.5.tar.gz > MD5: 2ae5d8f06d4847f5436bb99441dfc5cd > After compilation and install it should report on > $ cdrskin -version > Version timestamp : 2008.04.10.211529 $ cdrskin -version cdrskin 0.4.5 : limited cdrecord compatibility wrapper for libburn Cdrecord 2.01-Emulation Copyright (C) 2006-2008, see libburnia-project.org libburn interface : 0.4.5 libburn in use : 0.4.5 cdrskin version : 0.4.5 Version timestamp : 2008.04.10.211926 Build timestamp : -none-given- it now works ok cdrskin 0.4.5 : limited cdrecord compatibility wrapper for libburn cdrskin: verbosity level : 1 cdrskin: NOTE : greying out all drives besides given dev='/dev/sg1' cdrskin: scanning for devices ... cdrskin: ... scanning for devices done cdrskin: beginning to burn disc cdrskin: status 1 burn_disc_blank "The drive holds a blank disc" Current: BD-RE Track 01: data 5259 MB padsize: 1024 KB Total size: 5260 MB (598:33.38) = 2693354 sectors Lout start: 5260 MB (598:35/38) = 2693354 sectors Starting to write CD/DVD at speed MAX in real SAO mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. cdrskin: thank you for being patient since 1 seconds Starting new track at sector: 0 ... ... cdrskin: thank you for being patient since 1278 seconds Track 01: Total bytes read/written: 5514940416/5515988992 (2693354 sectors). Writing time: 1278.935s Cdrskin: fifo had 2692842 puts and 2692842 gets. Cdrskin: fifo was 0 times empty and 323524 times full, min fill was 99%. Min drive buffer fill was 20% cdrskin: burning done Speed is the same as with cdrecord and growisofs, 1x instead of 2x, I think this is due to verification/defect detection. -- [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
