Hi, having used (earlier) versions of cdrecord on the very same drive and media brand, I got the following errors today (on two medias)
(This is with Linux kernel 2.6.26) Cdrecord-ProDVD-ProBD-Clone 2.01.01a55 (i686-pc-linux-gnu) Copyright (C) 1995-2008 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/hdb' devname: '/dev/hdb' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.9'. Driveropts: 'burnfree' SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4167B' Revision : 'DL11' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-R sequential recording Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1114112 = 1088 KB Drive pbuf size: 1966080 = 1920 KB Drive DMA Speed: 11772 kB/s 66x CD 8x DVD 2x BD FIFO size : 67108864 = 65536 KB Track 01: data 0 MB padsize: 30 KB Total size: 0 MB = 300 sectors Current Secsize: 2048 Total power on hours: 6656 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2298196 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Starting new track at sector: 0 Track 01: 0 MB written. Track 01: writing 600 KB of pad data. /usr/local/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 10 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 00 00 10 2A 00 00 0C 21 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0 Sense flags: Blk 0 (valid) resid: 32768 cmd finished after 0.001s timeout 200s write track pad data: error after 0 bytes BFree: 1088 K BSize: 1088 K Track 01: Total bytes read/written: 32768/0 (0 sectors). Writing time: 8.876s Average write speed 0.1x. Fixating... Fixating time: 20.623s /usr/local/bin/cdrecord: fifo had 1 puts and 1 gets. /usr/local/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. Many thanks for a hint, Helmut. -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
