> Do you still have problems with cdrecord on Solaris ? Thank you for asking Jörg. Today I made some progress. Sorry I have not had time to look at the USB driver bug.
Previously I was using the JMicron JM20336 USB-SATA bridge. Now I have the JM20329, apparently a simpler (and slower) chip. The BH08LS20 drive connected via USB 2.0, using blank BD-R disc. Now I no longer get the I/O errors for cdrecord -atip (or -v -minfo). However, even though cdrecord -atip shows that the disc is blank, when I try to burn, cdrecord gives "capacity is unknown" message. Please advise me what to try next. Here is the output from the attempt to burn image to BD-R. Below that is the output from -v -checkdrive. # cdrecord -v dev=5,0,0 speed=2 driveropts=burnfree image.iso cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (sparc-sun-solaris2.10) Copyright (C) 1995-2009 J\366rg Schilling TOC Type: 1 = CD-ROM scsidev: '5,0,0' scsibus: 5 target: 0 lun: 0 Warning: Using USCSI interface. Using libscg version 'schily-0.9'. Driveropts: 'burnfree' SCSI buffer size: 64512 atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'BD-RE BH08LS20 ' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: BD-R sequential recording Profile: BD-ROM Profile: BD-R sequential recording (current) Profile: BD-R random recording Profile: BD-RE Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr). Driver flags : NO-CD BD MMC-3 BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 2097152 = 2048 KB Drive pbuf size: 3932160 = 3840 KB Drive DMA Speed: 3724 kB/s 21x CD 2x DVD 0x BD FIFO size : 4194304 = 4096 KB Track 01: data 14911 MB Total size: 14911 MB = 7634764 sectors Current Secsize: 2048 cdrecord: Disk capacity is unknown. cdrecord: Data will not fit on any CD. cdrecord: DVD/BD capacity is unknown. cdrecord: Cannot write more than remaining DVD/BD capacity. ------------------------------------------------------ # cdrecord dev=5,0,0 -v -checkdrive Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (sparc-sun-solaris2.10) Copyright (C) 1995-2009 J\366rg Schilling TOC Type: 1 = CD-ROM scsidev: '5,0,0' scsibus: 5 target: 0 lun: 0 Warning: Using USCSI interface. Using libscg version 'schily-0.9'. SCSI buffer size: 64512 atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'BD-RE BH08LS20 ' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: BD-R sequential recording Profile: BD-ROM Profile: BD-R sequential recording (current) Profile: BD-R random recording Profile: BD-RE Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr). Driver flags : NO-CD BD MMC-3 BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 2097152 = 2048 KB Drive pbuf size: 3932160 = 3840 KB Drive DMA Speed: 3731 kB/s 21x CD 2x DVD 0x BD
