Rob W <[email protected]> wrote: > > Do you still have problems with cdrecord on Solaris ? > Thank you for asking Jörg. Today I made some progress. > Sorry I have not had time to look at the USB driver bug. > > Previously I was using the JMicron JM20336 USB-SATA bridge. > Now I have the JM20329, apparently a simpler (and slower) chip. > The BH08LS20 drive connected via USB 2.0, using blank BD-R disc. > > Now I no longer get the I/O errors for cdrecord -atip (or -v -minfo). > However, even though cdrecord -atip shows that the disc is blank, > when I try to burn, cdrecord gives "capacity is unknown" message. > > Please advise me what to try next. > Here is the output from the attempt to burn image to BD-R. > Below that is the output from -v -checkdrive. > > # cdrecord -v dev=5,0,0 speed=2 driveropts=burnfree image.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (sparc-sun-solaris2.10) Copyright (C) > 1995-2009 J\366rg Schilling > TOC Type: 1 = CD-ROM > scsidev: '5,0,0' > scsibus: 5 target: 0 lun: 0 > Warning: Using USCSI interface. > Using libscg version 'schily-0.9'. > Driveropts: 'burnfree' > SCSI buffer size: 64512 > atapi: 0 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'HL-DT-ST' > Identifikation : 'BD-RE BH08LS20 ' > Revision : '1.00' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Current: BD-R sequential recording > Profile: BD-ROM > Profile: BD-R sequential recording (current) > Profile: BD-R random recording > Profile: BD-RE > Profile: DVD-RAM > Profile: DVD-R sequential recording > Profile: DVD-R/DL sequential recording > Profile: DVD-R/DL layer jump recording > Profile: DVD-RW sequential recording > Profile: DVD-RW restricted overwrite > Profile: DVD+RW > Profile: DVD+R > Profile: DVD+R/DL > Profile: DVD-ROM > Profile: CD-R > Profile: CD-RW > Profile: CD-ROM > Profile: Removable Disk > Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr). > Driver flags : NO-CD BD MMC-3 BURNFREE > Supported modes: PACKET SAO LAYER_JUMP > Drive buf size : 2097152 = 2048 KB > Drive pbuf size: 3932160 = 3840 KB > Drive DMA Speed: 3724 kB/s 21x CD 2x DVD 0x BD > FIFO size : 4194304 = 4096 KB > Track 01: data 14911 MB > Total size: 14911 MB = 7634764 sectors > Current Secsize: 2048 > cdrecord: Disk capacity is unknown. > cdrecord: Data will not fit on any CD. > cdrecord: DVD/BD capacity is unknown. > cdrecord: Cannot write more than remaining DVD/BD capacity.
Please send the output from cdrecord -minfo and cdrecord -atip. It may be that your drive has similar firmware bugs for BD-* as we know for DVD-* and DVD+* Jörg -- EMail:[email protected] (home) Jörg Schilling D-13353 Berlin [email protected] (uni) [email protected] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
