Hey Samuel,
Nope, "PGLog::undirty()" doesn't use as much CPU as before, but I found
it curious that it still showed up, as I thought you disabled it. As
long as you can reproduce the abnormal leveldb CPU-usage. Let me know
if I can help with anything.
Regards,
Oliver
On ma, 2013-08-26 at 14:23 -0700, Samuel Just wrote:
> Saw your logs. I thought it might be enabling
> filestore_xattr_use_omap, but it isn't. PGLog::undirty() doesn't seem
> to be using very much cpu.
> -Sam
>
> On Mon, Aug 26, 2013 at 2:04 PM, Oliver Daudey <[email protected]> wrote:
> > Hey Samuel,
> >
> > I have been trying to get it reproduced on my test-cluster and seem to
> > have found a way. Try: `rbd bench-write test --io-threads 80
> > --io-pattern=rand'. On my test-cluster, this closely replicates what I
> > see during profiling on my production-cluster, including the extra
> > CPU-usage by leveldb, which doesn't show up on Cuttlefish. It's very
> > curious that "PGLog::undirty()" is also still showing up near the top,
> > even in 0.67.2.
> >
> > I'll send you the logs by private mail.
> >
> >
> > Regards,
> >
> > Oliver
> >
> > On ma, 2013-08-26 at 13:35 -0700, Samuel Just wrote:
> >> Can you attach a log from the startup of one of the dumpling osds on
> >> your production machine (no need for logging, just need some of the
> >> information dumped on every boot)?
> >>
> >> libleveldb is leveldb. We've used leveldb for a few things since
> >> bobtail. If anything, the load on leveldb should be lighter in
> >> dumpling, I would think... I'll have to try to reproduce it locally.
> >> I'll keep you posted.
> >> -Sam
> >>
> >> On Sat, Aug 24, 2013 at 10:11 AM, Oliver Daudey <[email protected]> wrote:
> >> > Hey Samuel,
> >> >
> >> > Unfortunately, disabling "wbthrottle" made almost no difference on my
> >> > production-cluster. OSD-load was still much higher on Dumpling.
> >> >
> >> > I've mentioned this several times already, but when profiling with `perf
> >> > top' on my production-cluster, any time I'm running a Dumpling-OSD,
> >> > several "libleveldb"-related entries come up near the top, that don't
> >> > show up when running the Cuttlefish-OSD at all. Let's concentrate on
> >> > that for a moment, as it's a clearly visible difference on my
> >> > production-cluster, which shows the actual problem.
> >> >
> >> > Dumpling OSDs:
> >> > 17.23% [kernel] [k] intel_idle
> >> > 6.35% [kernel] [k] find_busiest_group
> >> > 4.36% kvm [.] 0x2cdbb0
> >> > 3.38% libleveldb.so.1.9 [.] 0x22821
> >> > 2.40% libc-2.11.3.so [.] memcmp
> >> > 2.04% ceph-osd [.] ceph_crc32c_le_intel
> >> > 1.90% [kernel] [k] _raw_spin_lock
> >> > 1.87% [kernel] [k] copy_user_generic_string
> >> > 1.35% [kernel] [k]
> >> > default_send_IPI_mask_sequence_phys
> >> > 1.34% [kernel] [k] __hrtimer_start_range_ns
> >> > 1.14% libc-2.11.3.so [.] memcpy
> >> > 1.03% [kernel] [k] hrtimer_interrupt
> >> > 1.01% [kernel] [k] do_select
> >> > 1.00% [kernel] [k] __schedule
> >> > 0.99% [kernel] [k] _raw_spin_unlock_irqrestore
> >> > 0.97% [kernel] [k] cpumask_next_and
> >> > 0.97% [kernel] [k] find_next_bit
> >> > 0.96% libleveldb.so.1.9 [.]
> >> > leveldb::InternalKeyComparator::Compar
> >> > 0.91% [kernel] [k] _raw_spin_lock_irqsave
> >> > 0.91% [kernel] [k] fget_light
> >> > 0.89% [kernel] [k] clockevents_program_event
> >> > 0.79% [kernel] [k] sync_inodes_sb
> >> > 0.78% libleveldb.so.1.9 [.] leveldb::Block::Iter::Next()
> >> > 0.75% [kernel] [k] apic_timer_interrupt
> >> > 0.70% [kernel] [k] native_write_cr0
> >> > 0.60% [kvm_intel] [k] vmx_vcpu_run
> >> > 0.58% [kernel] [k] load_balance
> >> > 0.57% [kernel] [k] rcu_needs_cpu
> >> > 0.56% ceph-osd [.] PGLog::undirty()
> >> > 0.51% libpthread-2.11.3.so [.] pthread_mutex_lock
> >> > 0.50% [vdso] [.] 0x7fff6dbff6ce
> >> >
> >> > Same load, but with Cuttlefish-OSDs:
> >> > 19.23% [kernel] [k] intel_idle
> >> > 6.43% [kernel] [k] find_busiest_group
> >> > 5.25% kvm [.] 0x152a75
> >> > 2.70% ceph-osd [.] ceph_crc32c_le
> >> > 2.44% [kernel] [k] _raw_spin_lock
> >> > 1.95% [kernel] [k] copy_user_generic_string
> >> > 1.53% [kernel] [k]
> >> > default_send_IPI_mask_sequence_phys
> >> > 1.28% [kernel] [k] __hrtimer_start_range_ns
> >> > 1.21% [kernel] [k] do_select
> >> > 1.19% [kernel] [k] hrtimer_interrupt
> >> > 1.19% [kernel] [k] _raw_spin_unlock_irqrestore
> >> > 1.16% [kernel] [k] fget_light
> >> > 1.12% [kernel] [k] cpumask_next_and
> >> > 1.11% [kernel] [k] clockevents_program_event
> >> > 1.08% [kernel] [k] __schedule
> >> > 1.08% [kernel] [k] find_next_bit
> >> > 0.99% [kernel] [k] _raw_spin_lock_irqsave
> >> > 0.90% [kernel] [k] native_write_cr0
> >> > 0.83% [kernel] [k] native_write_msr_safe
> >> > 0.82% [kernel] [k] apic_timer_interrupt
> >> > 0.70% libc-2.11.3.so [.] memcpy
> >> > 0.68% [kernel] [k] sync_inodes_sb
> >> > 0.63% [kernel] [k] tg_load_down
> >> > 0.63% [kernel] [k] load_balance
> >> > 0.61% libpthread-2.11.3.so [.] pthread_mutex_lock
> >> > 0.58% [kernel] [k] rcu_needs_cpu
> >> > 0.57% [kernel] [k] fput
> >> > 0.56% libc-2.11.3.so [.] 0x7fb29
> >> > 0.54% [vdso] [.] 0x7fff2afb873a
> >> > 0.50% [kernel] [k] iput
> >> > 0.50% [kernel] [k] reschedule_interrupt
> >> >
> >> > It seems to me like "libleveldb" is accounting for significant extra
> >> > CPU-loading on Dumpling. Another interesting fact, is that I only see
> >> > it use so much CPU on my production-cluster, which is serving around 80
> >> > KVMs over RBD, over 2x10Gbit/s ethernet per node and so has a much
> >> > higher and more diverse load than what I can generate on my
> >> > test-cluster.
> >> >
> >> > Any ideas about this particular one? Did anything change between
> >> > Cuttlefish and Dumpling that would account for higher CPU-usage by
> >> > "libleveldb", particularly under this client-load? Anything I can try
> >> > to bring it down? Thanks!
> >> >
> >> >
> >> > Regards,
> >> >
> >> > Oliver
> >> >
> >> > On vr, 2013-08-23 at 13:55 -0700, Samuel Just wrote:
> >> >> Ok, can you try setting filestore_op_threads to 1 on both cuttlefish
> >> >> and wip-dumpling-perf (with and with wbthrottle, default wbthrottle
> >> >> settings). I suspect I created contention in the filestore op threads
> >> >> (FileStore::lfn_open specifically), and if so setting it to only use 1
> >> >> thread should even out the performance.
> >> >> -Sam
> >> >>
> >> >> On Fri, Aug 23, 2013 at 1:44 PM, Oliver Daudey <[email protected]> wrote:
> >> >> > Hey Samuel,
> >> >> >
> >> >> > I commented the earlier settings out, so it was with defaults.
> >> >> >
> >> >> >
> >> >> > Regards,
> >> >> >
> >> >> > Oliver
> >> >> >
> >> >> > On vr, 2013-08-23 at 13:35 -0700, Samuel Just wrote:
> >> >> >> When you were running with the wbthrottle on, did you have the
> >> >> >> settings I gave you earlier set, or was it using the defaults?
> >> >> >> -Sam
> >> >> >>
> >> >> >> On Fri, Aug 23, 2013 at 12:48 PM, Oliver Daudey <[email protected]>
> >> >> >> wrote:
> >> >> >> > Hey Samuel,
> >> >> >> >
> >> >> >> > That changed something, for the better. :-)
> >> >> >> >
> >> >> >> > Your test-version, with wbthrottle off:
> >> >> >> > # ceph-osd --version
> >> >> >> > ceph version 0.67.1-18-g3fe3368
> >> >> >> > (3fe3368ac7178dcd312e89d264d8d81307e582d8)
> >> >> >> > # ceph --admin-daemon /var/run/ceph/ceph-osd.1.asok config show |
> >> >> >> > grep
> >> >> >> > wbthrottle_enable
> >> >> >> > "filestore_wbthrottle_enable": "false",
> >> >> >> > # rbd bench-write test --io-pattern=rand
> >> >> >> > bench-write io_size 4096 io_threads 16 bytes 1073741824 pattern
> >> >> >> > rand
> >> >> >> > SEC OPS OPS/SEC BYTES/SEC
> >> >> >> > 1 838 837.36 2283825.44
> >> >> >> > 2 1679 827.66 2309860.21
> >> >> >> > 3 2488 829.30 2320967.64
> >> >> >> > 4 2812 655.55 1847713.58
> >> >> >> > 5 3301 659.64 1849006.69
> >> >> >> > <...>
> >> >> >> > 120 54113 450.83 1271297.14
> >> >> >> > 121 54847 453.13 1277957.21
> >> >> >> > 122 55502 454.93 1281769.31
> >> >> >> > 123 55768 451.09 1271512.03
> >> >> >> > 124 55853 450.42 1269452.15
> >> >> >> > 126 55889 442.22 1246494.89
> >> >> >> > 127 56351 443.71 1250308.66
> >> >> >> > 128 57135 446.36 1257746.91
> >> >> >> > 129 57445 444.03 1251566.31
> >> >> >> > 130 57944 445.72 1256426.99
> >> >> >> >
> >> >> >> > Now with the wbthrottle-option enabled:
> >> >> >> > # ceph-osd --version
> >> >> >> > ceph version 0.67.1-18-g3fe3368
> >> >> >> > (3fe3368ac7178dcd312e89d264d8d81307e582d8)
> >> >> >> > # ceph --admin-daemon /var/run/ceph/ceph-osd.1.asok config show |
> >> >> >> > grep
> >> >> >> > wbthrottle_enable
> >> >> >> > "filestore_wbthrottle_enable": "true",
> >> >> >> > # rbd bench-write test --io-pattern=randbench-write io_size 4096
> >> >> >> > io_threads 16 bytes 1073741824 pattern rand
> >> >> >> > SEC OPS OPS/SEC BYTES/SEC
> >> >> >> > 1 822 821.23 2303875.45
> >> >> >> > 2 1510 738.54 2021390.37
> >> >> >> > 3 2224 740.29 1989216.54
> >> >> >> > 4 2843 708.01 1912598.24
> >> >> >> > 5 3294 652.35 1774048.26
> >> >> >> > <...>
> >> >> >> > 120 59470 495.58 1388776.41
> >> >> >> > 122 60067 489.29 1370954.96
> >> >> >> > 123 60083 487.74 1366434.49
> >> >> >> > 124 60449 487.49 1366477.77
> >> >> >> > 125 61122 488.97 1370480.73
> >> >> >> > 126 61679 489.52 1372290.03
> >> >> >> > 127 62195 489.69 1372523.64
> >> >> >> > 128 62608 489.02 1370226.98
> >> >> >> > 129 62655 485.68 1360719.66
> >> >> >> > 130 62688 482.01 1350560.76
> >> >> >> >
> >> >> >> > Slightly faster than with wbthrottle disabled.. For comparison,
> >> >> >> > one
> >> >> >> > more time with Cuttlefish-OSDs:
> >> >> >> > # ceph-osd --version
> >> >> >> > ceph version 0.61.7 (8f010aff684e820ecc837c25ac77c7a05d7191ff)
> >> >> >> > # rbd bench-write test --io-pattern=rand
> >> >> >> > bench-write io_size 4096 io_threads 16 bytes 1073741824 pattern
> >> >> >> > rand
> >> >> >> > SEC OPS OPS/SEC BYTES/SEC
> >> >> >> > 1 1074 1073.80 3079631.51
> >> >> >> > 2 2121 1060.21 3001542.58
> >> >> >> > 3 3111 845.59 2422586.94
> >> >> >> > 4 3132 745.40 2132915.48
> >> >> >> > 5 3336 665.33 1904205.15
> >> >> >> > <...>
> >> >> >> > 120 63700 530.81 1530767.77
> >> >> >> > 121 64781 535.37 1544861.37
> >> >> >> > 122 64944 532.10 1535398.54
> >> >> >> > 123 65312 527.70 1522971.49
> >> >> >> > 124 65526 528.42 1525134.71
> >> >> >> > 125 66160 529.12 1527158.94
> >> >> >> > 126 67214 533.44 1539955.47
> >> >> >> > 127 67855 534.29 1541965.13
> >> >> >> > 128 67939 528.79 1526270.55
> >> >> >> > 129 68178 528.44 1525239.57
> >> >> >> > 130 68811 529.24 1527681.84
> >> >> >> >
> >> >> >> > Cuttlefish still wins, but by a much smaller margin now. Looks
> >> >> >> > like
> >> >> >> > we're onto something. The fdatasync seems to be the key here,
> >> >> >> > rather
> >> >> >> > than disabling wbthrottle.
> >> >> >> >
> >> >> >> >
> >> >> >> > Regards,
> >> >> >> >
> >> >> >> > Oliver
> >> >> >> >
> >> >> >> > On 23-08-13 19:53, Samuel Just wrote:
> >> >> >> >> I pushed a branch, wip-dumpling-perf. It does two things:
> >> >> >> >> 1) adds a config filestore_wbthrottle_enable (defaults to true) to
> >> >> >> >> allow you to disable the wbthrottle altogether
> >> >> >> >> 2) causes the wbthrottle when enabled to fdatasync rather than
> >> >> >> >> fsync.
> >> >> >> >>
> >> >> >> >> Can you rerun the random workload with that branch with
> >> >> >> >> filestore_wbthrottle_enable on and then off?
> >> >> >> >> -Sam
> >> >> >> >>
> >> >> >> >> On Fri, Aug 23, 2013 at 10:26 AM, Oliver Daudey <[email protected]>
> >> >> >> > wrote:
> >> >> >> >>> Hey Sage,
> >> >> >> >>>
> >> >> >> >>> I'm all for it and will help testing.
> >> >> >> >>>
> >> >> >> >>>
> >> >> >> >>> Regards,
> >> >> >> >>>
> >> >> >> >>> Oliver
> >> >> >> >
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >>
> >
> >
>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
